VEVORPipe Tube Bender, 3/8" to 1" Manual Pipe Tube Bender, with 7 Dies, Heavy Duty Tube Bender Tubing of Steel Metal Copper, for Repair Shops, Blue

For $120, this bender is awesome. I've made a few boat hand rails with it and it works great. It's not for the novice tubing bender, but if you have enough material to make mistakes; that's how you learn. It makes nice and smooth bends, but it does leave a devit where the clamp eye is. If they could re-engineer that clamp eye so it wouldn't leave a devit; this thing would be the biggest bang for the buck. I love it though. For my boat and the boats I work on (working fishing boats) it's perfect. Small dent in the bend doesn't matter. I've used it on 3/8 copper compressor tubing, 7/8 and 1" sst rail tubing for boat gunnels. For the 1" tubing, you'll need a long cheater bar, but the bender holds up. I put a pry bar in it to extend the handle 1.5' and that worked great to bend 1" sst. I'd definately buy it again, but hopefully i don't need to.

Received the bender, and mounted it on a 2 x 6, lag bolted into the studs in the garage.I set-about a project that I had been postponing until this purchase arrived, and found it to be a solution to several different problems which I needed to solve.It is sturdy, and appears to be fit for long term, heavy duty use.NOTE: The photographs of this bender show the bender with the exchangeable radius forms installed upside-down. The square/rectangular protrusion in the casting is the stop which prevents the radius form from rotating. If used with the radius form installed as shown in the photos, you risk breaking a radius form when bending under extreme conditions,Additionally, you may find that you have to use some sand paper to remove the paint from the radius form pivot holes, before they will fit easily on the bender hub. A minute or two, with a piece of rolled-up 320 grit sand paper will do it for you, though--nothing to write home about.All-in-all, this will get quite a bit of use in the future days and months ahead.

works as stated, the paint needs removed in critical areas with care, the roller edges could be rounded slightly, so as to not score the tubing, not a bad thing... get yourself a protractor and mark the dies and the bolted on tube holder to make the same bends as needed in repetition, an the ability to go the opposite bending direction of equal degrees. bent 3/4" tube as i needed. the handle could be a little longer, but not a deal breaker. if you're mechanically inclined and need a bender that's a fair price, this will work as needed. in the process of making crash bars for my dual sport and a buddies motorcycle and so far so good. will share pictures when/if i can.

Most of the plumbing fittings are $$$ now.I use this product to bend some copper pipe 3/4 , not bad using this product for my 1st time ,tip -use some lubricant in order to make bends more smooth. I tried with pex too it's helps a lot if you need to bend some but pex is flexible is not going to keep the shape on a 90 degreeIt works great with hard pipe or copper pipe.

Did exactly what it's supposed to do!! Shipping was pretty quick. I mounted this to a concrete retaining wall and put it to the test. I took a straight piece of sch 40 pipe and turned it into an S. It takes some muscle but you can always extend the cheater pipe if need be. This is built very heavy duty!!!

Very poor customer support.The product arrived with a defective handle. It was basically manufactured wrong. I contacted their customer support expecting they would send a replacement part quickly and I'll be able to use the tube bender. Multiple emails and pictures of the defective part I was never able to get them to correct the problem. I could have returned the item , but that meant waiting another month to get a replacement . I decided to machine a new handle from a piece of cold roll steel, and solve the problem.

Shipped with duplicate 22mm bending dies and no 25mm bending die so I can't use it on 1" OD pipe which is what I really needed it for. I have contacted Vevor they claim to have responded with a ticket # and information, but nothing is yet available. This will be returned if not rectified. It appears it should do the job with the right parts. Vevor customer service is an endless unproductive loop. I ended up returning it to Amazon. I hope the 2nd one has all the correct parts.

Mejor de lo esperado. Calidad acorde al precio pero útil para trabajos livianos. Ahorra mucho tiempo y deja una buena terminación en los caños.El vendedor demoró un poco en despachar la mercadería, pero una vez en las manos de DHL, en 5 días lo tuve en la puerta de casa (Argentina).