NEWSTYLE DC 24V 15A 360W Power Supply Universal Regulated Switching Transformer Adapter LED Driver 110V/220V AC Input for LED Strip CCTV Radio

Works well, i've been using it to run a battery charger at 300W and it's not caused any problems. Gets warm at that output, but not dangerously so. The fan is quite noisy, but keeps the unit safely within its operating temperature.My only complaint is that the fan turns on well before it needs to, almost as soon as the unit's turned on. When i'm only charging small batteries at 20W or so it should not need a noisy fan clattering away.As with all these open frame PSUs, some care is needed when wiring them up. Lethal voltages are present on terminals that fingers can easily get into. Having a reliable earth connection is an absolute must.

Pros- Great for a price- handles 20M 5050 rgb led strip with no problemCons- LoudIt was okay when I was testing 5M, however once I've connected 20M strip it goes loud even at 40% brigtness.I've noticed that blue, cold white makes it particularly loud at 50% of brigtness.When Brigtness set to 100% you will hear it in another room with closed doors so if you are planning to have a quiet evening it is not for you.I got it stored in a special basemend I made for a server and even when fully closed I could here it.

Easy to use but lack of any instructions may put some off, wiring was easy and I soon had it hooked up ready to go. I was using the PSU to power an Apple Cinema display 23" monitor, genuine Apple ones are over £100 and given the power output of this device it was more than capable of supplying the 95 watts/24 volts. Despite only taking less than a third of its supposed 360 watt output the fan was full on and working overtime... constantly!! It was just too noisy for my needs so I had to return it. If you don't mind the noise it's a simple but well made device.

When I bought this to replace a blown out Chinese power unit for a new 3D printer, I was not expecting anything great. I was merely looking for a quick, cheap solution rather than have to wait 6 weeks or more for a dubious replacemnt from the printers manufacturer. However, I have been delighted with this Power unit which is well built and suprisingly quiet. It has been working nearly non stop over the past few weeks and to date I have no complaints. Therefore, I am happy to give a solid thumbs up and highly recommend it.

These are good PSUs. However, I have notice that a few of them make a high pitch noise occasionally, particularly when dimming LED lighting. Also, the fan on these units are noisy, but can easily be disabled if required.

Good value for money

I bought this to power my lipo battery charger, loaded up to 13amps so far with no problems and voltage remained stable at 24v. The fan copes with the heat very well and is quieter than my old 12v psp.The compact size makes these psp's great for mos projects.

The PSU is not able to handle load for longer period of time (despite the load being well below it's max A).It was working with ~ 10A for ~ 7 days (3-12h per days). On last day worked fine, and then when device was disconnecting, it just died. I was using MOSFET to sent the power for the device, so nothing was damaged by it.If you using it, you cannot expect that it would probably handle anything > 5-6A for longer period (if you're looking for 10-13A PSU that should be working > 12h, look for something a bit more expensive).Now I've ordered 24V/25A PSU.