Creality Sprite Extruder Pro Kit Upgrade Direct Drive All Metal Hotend 300℃ High Temperature Convenient Retrofit for Creality Ender 3/Pro/V2/MAX/NEO(4.2.7) 3D Printer Head Replacement

Installation and setup was quick and easy, even on my already modified Ender 3! Instructions are okay, someone who doesn’t have a lot of experience working on printers might want to follow an online guide or video, but it’s still very simple. It performs perfectly and is an amazing upgrade from the stock Bowden extruder. It heats up quickly and I’m excited to be able to start printing good quality items with some more flexible and exotic filaments!

Fácil de instalar y funciona muy bien. En la Ender 3 3D, debí hacer un pequeño ajuste en la platina del eje x porque chocaba con el carro, pero sin problemas

I thought it would fit my printer because of the description and reviews, but it didn't. Even with a printed adjuster for the stop pedals it didn't work. I have an Ender 3 V2.

Worked great on ender 3 max neo.

Had to tune a lot great upgrade for the money install was easy so far so good

What else can I say, it is an easy to install upgrade that actually performs very well! Will definitely purchase again!

Don't buy any Creality upgrades or products. Terrible firmware issues, will ruin your printer.

This has been a journey for me. From having to replace parts and finding parts that work. But none of the parts I needed to get were the fault of the hotend here, which is amazing. Part of me wants to point out though that there are some issues to consider though, as I had issues working with the firmware.First, my issues were with the Ender 3 V2 Neo, which was great until I needed to upgrade anything related to the hotend. First, I tried to update using Spider hotends, which were great for my Ender 3 Pro, but not for the Ender 3 V2 Neo where clearance became a issue on every MK8 hotend I tried. (From the Phaetus Dragonfly BMS, to the Creality Spider MK3 and MK4 Ceramic.) I had issues with the original Neo hotend with some prints, and found it was actually crooked and that is why it kept jamming up so I wanted something better. I later found this, but if you have the Creality Ender 3 V2 Neo you will need to find an adapter to print out for the X switch, I used my resin printer to print out the adapter and it looks great installed. I found out though that the printer did not take up the sprite firmware, and it had issues with leveling the bed, I tried to go back to the original neo firmware, even updating the screen only to find out that the 4.2.2 board became bricked. I had replaced the Ender 3 Pro with a 4.2.7 and I had a spare board that I used to repair the setup, only to find out that my CR touch no longer works. (Both boards were 4.2.2 boards.)Moving on, this kit included everything you need to installing outside of that adapter for the X switch that I needed specifically for the Neo. It even added ferrules already installed for the fan and hotend, I even updated the V2 Neo to have ferrules on the power and heater for the bed. I did have to tighten down the heater block as it was wiggly when I got it, it did not take much to correct that by just tightening it up. The assembly included the gantry assembly which the Sprite attaches too, as well as the wire harness that is easily installed into the Sprite. The wire harness is longer than you would need for the Ender 3 V2 or Pro that I have, so there was a lot of extra cabling. The whole assembly of the Sprite is lighter than my direct drive Ender 3 Pro that I made. That will likely help with the print quality as speeds get higher. Overall, this is supposed to let you get to 300c and move at 300mm/s which is faster than I actually print but I need those temps for some of my parts as I print with ABS and Nylon as examples.Now, I actually haven't finished my journey of fixing the Ender 3 V2 Neo's problem of hotend replacement, however, what I have found in the Sprite is awesome and I am looking forward to actually printing with it.