VAGURFO Rubber Edge Trim,Car Weather Striping,Door Rubber Seal Strip Trim Seal,Automotive Weather Stripping Edge Guard for Cars, Boats, RVs, Trucks, and Home Applications (20 FT)

Quality product. But didn't fit back window. My fault for not checking.

Perfect match for my 2002 4runner. Mine's the Limited, but the other 3rd gen 4Runner trims would match too. One 20' roll did the entire driver's door and 3/4 of the passenger door. Be sure to undo the floor strip and the one low dash trim piece. It takes a 10mm socket and the panel takes phillips. You'll also want to pop your column trim between front and back doors, but that just pops off with a good tug. The factory seals have no seam.Put your seam toward the lower front where it's less noticeable. When I did mine, holding the new trim out in front of where I was working seemed logical--but holding it so the new trim is nearly perpindicular/90* actually had the smoothest and quickest result.Good luck!

Doesn’t go on easy still blows air in through the seal not made for the 2006 gmc sierra 1500 crew cab front side or passenger would not recommend buying at all go the OEM route I’m out close to 20 bucks I couldn’t order the passenger side OEM model but was able to order the front drivers side OEM off of Amazon definitely buy the OEM GM kit door seal off a auto website will sound a lot better and hold in the pressure in the cab

Had to trim to fit but it works great

Fits good on my car it's good material it was Worth the money I spent on it

covered all minor leaks around my vehicle that old weathering not longer covered. easy install. although need to make sure the ends are sealed. if simply cut then rain or snow can enter into the opening from where it is cut. and will rust from within. use heat or alternate method to seal off ends after cut to size.

It seals but leaves a gap it’s not a perfect fit for a 2010 GMC sierra

I needed new door trim for a Ford Excursion. This product was perfect, good quality and easy to install.