USB 3.0 KVM Switch HDMI 4 Port Support 4K@60Hz 2K@120Hz Simulation EDID,MLEEDA HDMI USB Switch for 4 Computers Share 1 Monitor and 4 USB 3.0 Port,with Desktop Controller and KVM Cables

I have a dual monitor setup and I needed a KVM switch to seamlessly switch from my work pc to my personal pc. At first, I didn’t know what cables I needed so I watched a couple of videos online. My switch wasn’t working at first because I got a few HDMI to DP cables. After trouble shooting, the KVM will ONLY work if you have cables with the SAME ends (HDMI to HDMI & DP to DP). For those that said it does not work, see if you had the same issue as me. My set up is a little messy as it’s a lot of cables but it works. I highly recommend buying a USB hub or two to plug in your peripherals as your devices will overheat if plugged into the KVM directly. Haven’t had a major issue yet.

I had previously bought, and returned, a cheaper (~$35) KVM which stopped working after two weeks. That cheaper one was so light that it wouldn't stay where I put it. This one is leagues better. It has some weight, so it stays in place on my desk. I've only had it a couple of months, but so far, it has worked flawlessly. It has EDID simulation, so my computers don't freak out, and it feels high quality to the touch. It uses standard cables too, not those combination HDMI+USB cables that cause problems. At double the price of my previous one, it feels four times a better product. Soon after I bought it, I needed another one to only switch video on some other computers (I didn't need USB, which is what failed on the cheap one), so which one did I buy? This one again! [Edit] After more than a year of use, these KVMs have performed perfectly. They were $80 when I bought them, now I see they're at $55 (after the coupon). That's an insane value!

I have a PC (laptop) and two Macs (Laptop and Mac Mini) connected, with 1 monitor. This was very easy to set up. The only snag I run into is when switching to the Mac laptop when it is already "awake". The mouse and keyboard will work fine, but my monitor won't pick it up. I don't think this is a problem with the KVM, it is the Macbook. It works perfectly fine with the PC laptop and the Mac Mini. The only way I've found to resolve this is to unplug/plug the HDMI from the macbook. I had a cheaper KVM that only worked with 2 computers before and had the same issue with the Mac laptop. Overall, this KVM does its job well so far.

I bought this to swap between my work computer(Mac Book Pro) and my personal computer(2 Year old higher end gaming PC), to connect to use my main monitor(Slightly older less optimized 4k 144hz monitor) which requires the full bandwidth of display port 1.4, and my support monitor(1440p 144hz monitor). Let's start with the good: - The switching was fast, and the included remote worked well, including all USB and monitors - It was easy to tell which system was on - 4 ports was more than enough for my, and probably most people's needs for swapping back and forth - It includes pretty much everything you need to make it work, including 2 display port cables, the switch, and two male USB type A to male USB type A cables, which aren't standard in most places, but do seem to be standard on KVMs - There was no response time issues for my mouse and keyboard plugged in through the kvm, which was one of my main concerns Now on to the Bad My only real gripe, and the ONLY reason I purchased this KVM is that you don't get the promised full Display Port 1.4 bandwidth, my main monitor requires that to output 4k at 144hz, it is a limitation of the monitor, and has been a pain in a few areas, but I used two short known good cables, purchased from good reputable sources, and independently can handle running my main monitor. When I connected it via the KVM I would get intermittent flashing when the refresh rate got above 60hz. My MacBook worked fine as the most it could output was 60hz, but something would happen above that level that would cause the screen to flash, regardless of the task. I did try powering the KVM to see if that would solve the issue. but it was a no go. My verdict: This gets 2 star because it did not deliver what was advertised, and what I needed, but if you are looking for a kvm that isn't requiring the full bandwidth of display port 1.4, like for a pair of 1440p monitors this will likely work great for you.

This is a great little device to connect four computers to your monitor, keyboard, and mouse. I also put the webcam on it as well so the webcam is always connected to the active computer. The HDMI and USB connection from each computer connects in the back as well as the output to the monitor and the power cord. Four USB inputs are on the front for your mouse and keyboard and in my case webcam. That leaves one that I often plug in flash drive so that I can transfer files from one computer to the other without unplugging the drive. There are individual push buttons and LEDs for switching between the four inputs. As well as a remote switch to cycle through them if you want to use it. Plus a power switch right on the front as well. Everything is very well laid out and very compact. My only issue is that on Windows 11 PCs only, sometimes when switching to that computer, there is no video. You can try switching to a different computer and back again, which often works. Or use the windows key, shift key, control key and the letter B to reset the video card in the PC. I give the kvm switch five stars nonetheless, because this is a Microsoft problem, not a problem with the product.

So far so good. Setup was pretty easy (bonus points for providing USB cables with the unit) and it operates as I would expect for a KVM. More bonus points for it acting as a USB hub instead of just supporting keyboards and mice. I noticed a couple of reviews mentioning problems around the 4 month mark. Fingers crossed I won't be reconsidering this review in a couple months.

Works without any issues with 3 computers and two monitors, using all four usb inputs.

Ho acquistato il dispositivo per due PC con due monitor. Funziona perfettamente con anche un cavo che passa da DP a HDMI sul secondo monitor. Nella dotazione che arriva troviamo due cavi USB A-A da connettere ai PC che portano tastiera, mouse, joystick e videocamera, il cavo USB per l'alimentazione del dispositivo (che funziona perfettamente anche senza alimentazione !!!!), un cavo DP-DP, un cavo HDMI-HDMI, il pulsante per il controllo remoto dello switch a cavo. Tutto ha funzionato perfettamente al primo colpo. Interessante soprattutto il fatto che sostiene perfettamente il passaggio da DP a HDMI sul secondo monitor (entrambi i miei monitor hanno solo l'ingresso HDMI). Durante lo switch i monitor si accendono e spengono un paio di volte nel primo istante, mantengono la posizione delle icone, ma tutte le finestre aperte passano sul monitor principale, effetto che tutti questi dispositivi fanno non avendo l'emulazione EDID, Lo uso sia con windows 10/11 che con Linux. CONSIGLIATO !!!

Appears to be a returned item that was sent out again. Missing the wired remote. Cables all loose in the bottom of the box not tied. Didn’t come with the cables that were advertised to come with it, different. Delivered with 2usb, and 2hdmi which were different types. SKETCHY!!!

I haven't used a KVM switch since they were all ps2 and vga ports. This works great and does allow you to share usb devices between machines, assuming you have the appropriate driver installed for that device on each computer.