NADAMOO Tub and Tile Spray Paint White, 450ml, 4 Cans, Aerosol Bathtub Refinishing Kit for Porcelain Fiberglass Ceramic, DIY Resurfacing Bathroom Sink Countertop

Easy to work with, great product. Very nice gloss, and comes with sanding sheets, easy to sand, Make sure you have ventilation !!! and wear a mouth n nose mask because spray is strong. !!! the key is take your time on "prepping properly." And this goes on very smooth.p if you spray just a Little and light coat at a time. First coat you will see the old stuff still . Dry, respray lightly and little again. and repeat. It turns out so smooth to touch. I did my upstairs bathroom old yellow vanity top to white color and downstairs bathroom old green specked vanity top to white color and they both look like brand new pieces! The upstairs vanity was done months ago, and still looks new, I just started downstairs one , there are a few other colors available also. I'm very pleased with this brand and product .

I used 3 out of the 4 cans and each can was one coat for the entire bath+walls. I made sure to follow the preparation steps and did a light sanding over the entire surface and made sure everything was dry and free of debris before I started spraying. I shook each can about 2 minutes before spraying. I kept a distance of no less than about 9" from the surface and kept the can moving. I also waited about 20min between each coat. I didnt see any globs or paint running and overall, it went on pretty uniform.ALSO, I'm in a very dry state, but I think if you live in a HUMID area, this might not work. I think the surface and air have to be dry because the paint won't dry and harden properly if there's any moisture... That's just my 2 cents.Definitely not a permanent solution for an old shower but will do for the short term.

After working extremely hard to prep the space in my shower and bathroom, cleaning harder than it’s ever seen before, I taped up plastic to protect the area and sprayed. First a few things to note, the area I’m covering is a triangle shaped shower, it’s very small, about 3’ on each side, I only did the floor and it was white originally but since I’m not the first person to rent and care for this space, it was pretty gross and discolored. It took 1.5 cans to cover the area, about 5 coats, I should have done more but I was so over it - more than advertised in the info on these crappy cans. I did this project at the end of May, about 4 months ago. Only 2 months in and the finish started to look like it was wearing off, I was gently cleaning it to help it last longer and now here we are, 4 months later and I may as well have never done it in the first place. Don’t waste your time on this stuff, get something a little more expensive and capable because this spray is utterly worthless. As others have noted, residue from the spray does cover every surface so if you don’t want to listen and find a better product, at least listen and cover your entire bathroom in plastic or you will have fine white dust on everything. I wish I had never wasted the hours I spent prepping and doing this and then the 3 days after it requires for curing (meaning no shower so plan accordingly)

I used this on a good old toilet that I did not want to remove or replace during a remodel. So I painted it in-place as it was, tucked inside a little cubby hole set back in the bathroom wall. I had a widow open and an exhaust fan, but could not keep the overspray moving fast enough. For that reason, and also because white is hard to see, it was tough to not get any dry areas or drippy areas. But it worked ok. After that, I used it on all the ceramic towel bar holders, built in soap dish and tp dispenser, because those would be hard to make look nice with a roller or brush. In the end, the color was a bit cooler than the paint I used on the walls, but the finish is very nice, has good gloss and seems durable enough. Took about 5 cans for what I did. It was a lousy job to do, but the product worked pretty good overall.

Worked for me

We love this but we do it every year to insure the freshness of it . We do have mild chipping but with touchups it’s not unmanageable . I would recommend . Fumes require a mask or open window or a ventilation of some sort . I wouldn’t do it in the winter ( we did ) 🤣

Es buena pintura

I attempted to use Rust-Oleum 207000 Marine Coatings Topside Paint, Quart, Semi-Gloss White on my shower and tub. It was a disaster and left everything looking light grey. It took 8 bottles of the Nadamoo tile Tile and Spray Paint. I'm so happy with how it turned out and how easy it was to use. Be sure to use good ventilation. The fumes are very strong. This is such a great product!