CWM Commercial Sink Faucet with Sprayer,Pre-Rinse Kitchen Brass Constructed Polished Chrome with Pull Down Sprayer 26"Height 8" Center with 8" Add-on Spout Deck Mounted

This is overall very heavy duty and seems well made...except for the pot filler/faucet spout.It is metal, but it's so thin I originally thought it was ABS.And while the aerator is removable, it isn't a common size. It's 13/16". I needed to go to several plumbing outlets to locate it. Home Depot or Lowes didn't carry it and after the third plumbing store, I located it an Ace Hardware of all places.Other than that, it's really well made and there were no surprises in installation. The water flow is great and the pressure from the hose is fantastic.If I had any suggestions, it'd be that the aerator is a more common size and thread and the manufacturer had a selection of different and sturdier spout available.Update: One year on. It's still doing great. The only issue that I've encountered is the sprayer valve wouldn't release when the handle was. It'd continue spraying for several seconds as but valve wouldn't pop back into the "off position"The solution was very simple. Disassemble the valve and lubricate the valve stem and seal with silicone grease. Once that was done and flushed out, it was like new again. took all of 4 minutes and required only a wrench to remove it from the handle (20mm?) and a slotted screwdriver to remove the valve from the valve body.This easily maintains it's rating.

The media could not be loaded. Installed the faucet in November of 2018, and I have never been happier with a kitchen faucet as I have with this one.The flow of water is great, I can fill a gallon container in about 15 seconds and it's not even on full blast.It's sturdy and held up well with teenagers. Those that have or had teenagers know what I'm saying.The directions are to be desired, but take a little time to go over them before you start and it will go smoothly. It took longer to take the existing one out than it took to install this one.Having the faucet up higher than the ones you buy in the big box stores is far more useful in filling a container and rinsing them, than just flowing into a corner.The sprayer took a little getting used to as the pressure really sprays.One of the biggest selling features is the price. The big box stores can't even touch it for the price.I have recommended it to my family and friends.

Thi faucet is really well made, but the sprayer when pulled down, does not even go into the sink, it stops 7" above the center bar dividing the two sinks.I wanted to be able to pull it over to the side, enough to fill a pot, but if doesn't reach outside the sink itself.I contacted the seller, and out of all the Customer service people, I have ever worked with, this seller goes way and above what I had ever expected.

Sturdy and impressively substantial for what I paid. Fixture went in easily and instructions were clear and concise. Wife loves the almost insectile look of this industrial design and the pressure from both the sprayer and the tap is robust. Really well packaged in foam so no risk of shipping damage, and the chrome finish is flawless. I make threads for a living, for over a decade in an industry where items cost obscene amounts of money, and i'm honestly really happy with the quality of this assembly for what it cost. Hope it will hold up well. They have included replacement grommets for almost every mating part in this assembly. Only just finished install at time of this review. Now the rest of the kitchen looks overdue for an update next to this faucet.

Opened the box, a nice shiny new faucet. Sturdy, size I wanted, all ready to install. Installation pretty easy. Some parts were reassembled. Hook up the water and water goes everywhere. The reassembled spray had leaks at every joint. The spring would not allow for tightening and the tubing on one side what round so no wrench could be on it to tighten. This is 2 hours before an event feeding 200 people. Managed to be able to use parts from the new unit to fix the old one. Now it's not returnable without disassembling the fixed faucet.I would not recommend this faucet. I'm out $250 for a 9" extension and a spray head.

Bought this faucet in 2020 - the cold water side started vibrating about a year in - loudly until you turn it on full blast (not air knocking - we bled the lines, replaced washers, etc.) . The hot has now started doing this. We think we need to replace the whole cartridge - but not sure the specific model to buy. Help!

Had a difficult time finding a sprayer that met my two hole sink needs. Luckily what was my only option was exactly what I needed. Expertly packaged, the faucet took roughly 30 minutes to install if you do not count the removal of the old faucet or alterations I had to make due to my particular setup.The only complaint I have is that the wall support bar holding the vertical portion of the faucet does not come in adjustable sizes and as such I was not able to use mine. The wall support also seems to hold the vertical portion in position not letting it spin when the faucet is turned from sink to sink. Without this, my middle bar does rotate a bit but I have not seen any leaking.