ANYCUBIC Water Washable ABS-Like 3D Printer Resin, High Toughness and Durability, High Precision and Easy to Post-process, Low odor, Wide Compatibility for all LCD Resin 3D Printers (Grey, 1kg)

This is good stuff for being water washable. It's been durable enough for me, but keep in mind that I don't paint to play. I don't even play TT games. But I have dropped my minis printed with this and they've survived. If you're rough on yours or if you handle them a lot, you might have issues that I haven't encountered, but in my use-case it's good resin.It saves me a lot of extra smell and cost. I've been resin printing for a good long while now and this is what I've come across that works best in my workflow and gives me the detail:durability ratio I'm looking for.Make sure you read up on all your resin safety stuff, etc, etc.

This new ANYCUBIC Water Washable ABS-like Resin V2 is amazing. I have been 3d printing for over a year using my ELEGOO Mars3, a magnetic build plate and ELEGOO water washable resin. I have been a fan of the ELEGOO WW resin because of it's low odor and water washability. My prints have come out highly detailed with very few failures. BUT, the prints are brittle and break easily, particularly things like swords, spears or wands that the figure is holding. Lots of repairs needed and lots of CA glue.I'm not having this problem with the new ANYCUBIC product. Prints have great detail and are much more flexible! Thin parts like swords, etc. can flex a bit, and do not snap off when painting or slightly bending them. It is also low odor. It does have a smell, but it is a milder odor than ELEGOO.The ANYCUBIC WW ABS-like Resin V2 is also significantly thinner. This makes clean up much easier. More of the uncured resins drains back into the tank. The remainder wipes off easily with less wasted product and fewer paper towels.Post processing is a bit more challenging. Supports are more difficult to remove and often require cutting. While this does take more time, its still worth it for the durability.

Absolutely love this resin. I used to daily drive Sunlu ABS Like, and this resin is a significant improvement. I've printed everything from OnePageRules to DmStash to Lord of the print Minis, and I've had zero problems. Prints have come out faster, cleaner, and more resilient than other resins I've used. plus I don't have to use IPA to clean them, though I have used it as an experiment and didn't have any negative effects. I think the only complaint I can possibly think of is that this resin will separate in the Vat after only 24-36 hours of sitting untouched. But that's something easily fixed with a quick mix of the resin.Settings I use for My Anycubic Photon Mono X:Burn in layers--Number of layers-5Exposure-15sSpeed--Lift- 2 MM/sRetract- 3 MM/sNormal Layer--Layer Thickness- 50umLight off Delay- 0.5sExposure time- 1.5sLift Distance- 6mm

My old review: "The new bottle does not indicate anywhere on it that this resin is water washable and the instructions on the back of the bottle state that it should be washed with 95% Isopropyl Alcohol."While it is true that the new label does not mention water washable and the instructions on the back of the bottle say to use 95% Isopropyl Alcohol, this resin is actually Water Washable. My printer was down for a few days while I waited on a replacement LCD screen, but I have now printed with this resin and it is very good resin if you want water washable and tough. I'm still calibrating and dialing in my settings, but the first print with the settings for my old (and very brittle) resin came out pretty good and are surprisingly durable. If the label gets changed to clarify that this resin is water washable, I'll bump my review up to 5 stars.

I tried a bunch but this has low fumes, great color consistency, easy part cleaning, reliable UV curing, and performance better than all other water wash ABS like resins I tried. This costs a little more but performs so well and saves me time.

I switched from Anycubics water washable to the Pla-like water washable. The odor is less and the prints are just as good. The durability / flexibility seems to be better. This is my new fav.

Water-washable used to be a gimmick, but Anycubic has pulled off a product that competes with my tried and true Sunlu ABS-Like without needing any chems to clean it. Print specs are a little off, had to lower my burn in layers and once that was done it's perfect.

Quality wise this resin is crappy and very finicky. I've bought multiple bottles of this stuff and on 3 different printers the results are the exact same. When I print smaller items such as 1/25 scale model car parts it's generally ok. But when I print anything with a larger flat surface such as a 1/25th scale car body soon as the print is washed (or is out the printer for 5 to 20 mins or so, small divots form on the surfaces). It's like there are air bubbles trapped in the 3d print and the air has the release therefore forming multiple small divots (holes) therefore downgrading the quality of a print that I'm supposed to sell. This stuff washesvery easily in water but if u want high quality prints don't use this stuff. I've used every temperature of water to wash this stuff and the results are the same everytime. I can actually see the air bubbles releasing from the finished print leaving holes right before my eyes, even before I attempt to wash the print. This stuff sucks. I wasted a bunch of money using this stuff sinces I do a lot of print that all get sold. Use Elegoo water washable instead. It's high quality and zero holes. If u sell your prints don't use this stuff.