MIG Welder, 200A 110V/220V MIG/Flux Core/Spool Gun/Lift TIG/Stick 5 in 1 Aluminum MIG Welding Machine, IGBT Inverter Synergic Control, Digital Screen Display, Over Loading Protection

At its price point, this is one of the most impressive machines I have used to this day. I’ve been welding for close to 20 years now and this thing lays down when you want it to. I run it as a piggy back machine off of my older miller trailblazer (generator 220v power) and I’ve put about 100 pounds of wire through it so far 10 10# spools in a few weeks time only had it over heat 1 time because it was sitting next to the trailblazer which was throwing off substantial heat. I’ve now relocated and haven’t had that problem since. I ran it nearly maxed out welding 1/2 plate steel to 1/4 plate steel for about 4 hours straight with no issues and excellent penetration. If you are having problems with this machine it’s more than likely user error or wrong settings, do yourself a favor and do some research on proper settings and technique. The plasma cutter on it performs well with light duty cuts but will struggle cutting heavier plates for a long distance. It will cut through 1/4 plate like butter but anything thicker requires a little more attention. The only real flaw I can find with this machine is it is not capable of AC current (tig aluminum) other than that it exceeds performance expectations for anyone looking for a home or garage welder. I use this thing to make money and it’s paid for itself 13 times already in just a few weeks. At that rate I’ll buy one once a month if I have to.

Worked perfectly right out of the box. Great welding machine for the price.

Tried the Yeswelder, it was not fun. after returning tried this Sunstac which is very similar but much better in quality, price, and user experience.Side Door is a bit small but not a deal breaker because it DOES fit a 10 lb spool which i was worried about.Metal Drive Roller unit is great for this price point.Screen is easy to see, read, and navigate, even in the sun.Torch/whip/gun handle quality is great.lugs are robust and solid copper.Fan is intermittent which is nice so the machine is only humming when it needs too.When you turn it on it take a few seconds to light up but don't worry this appears to be normal for the Sunstac products (I have them all, mig , acdc tig, plasma. separate machines).I did drop this machine and it was okay. So Build Quality is Reliable for work conditions, still try not to drop it i may have gotten lucky.have not tried stick, so cannot vouch for 6010 but the leads are basic but good.. I have a Lincoln Engine Drive for this..hoping i get some info or a response regarding the plasma cut tips and consumables which i mentioned in another review.wish to do business with you . thank you

Go online and find the video how to setup the welder before you use it. The instruction comes with the unit doesn't show very clear how to connect all the cables, especial the negative cable where it goes.However the unit works great when you get it setup right.

Though I have yet to weld or cut anything, I wanted to share the electrical ratings given in the manual to help potential buyers make a more informed decision about current draw and what size circuit breaker might be needed for each feature of this machine. For the record, I plan to do nearly everything on 220 volts AC, but at the moment, I only have a 30 amp 220 circuit and a 30 foot 40 amp RV extension cord and all of my cutting and welding will be done outdoors. Also, I will only be using the Plasma, MIG, Flux and Stick welding features (yes I know about shielding gas in windy environments, I'll try to make accomodations when possible). Also, understanding how much functionality is packed into such a cheap machine, I will be very cautious and try not to overdrive it in hopes of making it last for as long as possible all while using it semi frequently all year in every weather condition from hot/humid, warm/rainy (under a canopy) to frozen/snowy all outdoors as I have no garage/shop (yet), but always have need to fabricate and construct or repair heavy equipment for other local small contractors in asphalt paving. If something goes ZAP and it is larger than an integrated circuit, I am competent to repair it myself.All of the above being said, I preemptively gave this unit 5 stars as it's everything a steel welder could hope for in one cheap lightweight box, and it's way more visually pleasing than my baby blue Yeswelder TIG205-DS. Should my expectations be sorely mistaken, I will edit my review appropriately.

First, on arrival, system was and is missing air hose and hose fittings required for plasma cutting.Second, the manual is marginal at best and seems incomplete. For instance, there is a wire drive polarity lead with an exposed contact. The manual indicates how it should be connected for some of the functions but doesn't say what to do with it during plasma cutting. The cable looks like it might be possible to disconnect it completely but it doesn't unplug easily and it seems like a poor idea to force it.At this point, it can't be used so it is currently worthless.

This is a great little welder for the price point. I am very impressed and pleased I selected this particular unit. It wasn't easy. I based my decision on feedback and reviews from other buyers. The only complaint I have, and it's pretty significant, is there was nothing on the package to show me how to set up. No instructions whatsoever. Most people buying welders have previous experience but not all. So this was a real bummer. I had to go on the net for help and that was even difficult. Finding this exact model wasn't happening. So I had to use several different postings to get it set up.Besides this oversight I highly recommend the Sunstac 150A welder to anyone looking for a light weight very portable welder that gets the job done!!

My son really loved his gift, is a very well made welding machine. I really want one for my son and I found it