VADANIA 40" Heavy Duty Drawer Slide with Lock #VD1551, 150lb Load Capacity, 3-Fold Full Extension, Ball Bearing Lock-in & Lock-Out, Side Mount, 1-Pair

I was skeptical but I'm actually impressed, these really are the heavy duty industrial drawer slides they claim to be. I have a recording and editing desk and needed drawer slides strong enough to hold up a midi controller that weighs around 75 lbs plus the slab of wood underneath. This is actually my 3rd pair of drawer slides because it's the best I could find for the price, but they were terrible! I included a photo of the Home Depot pair I replaced, avoid these if you need to support something with weight.I was debating between the Vadania drawer slides and a slightly cheaper set and boy am I glad I went with these. The drawer slides handle the weight with ease and the midi tray actually glides now!I will say I am having a little trouble getting one side to lock on the in position which I will admit could very well be user error from how I put the desk together :) I really don't care enough to find out because the other side locks so it isn't noticeable.They are a little frustrating to line up but all drawer slides are and these at least lock so they don't keep popping out like cheap kind.I'll report back if anything changes but so stoked so far and very happy with these!

These worked great for my purpose - a sliding shelf to mount a (heavy!) generator in an offroad trailer.Word of advice though - take special care when assembling your final product. I test fit mine and it worked flawlessly, then I had to break it all down for painting. During reassembly I accidentally swapped the outer rails around, much to my regret. (I didn't realize that they actually had a certain orientation they needed to be.) When sliding the shelf back in it wouldn't insert into the outer rails, and like a dope I forced it a little harder than I should have resulting in me having to force it back out again to see what the problem was. In the process I dislodged a pin mechanism in one of the inner rails. (Thankfully I saw the pin fall and didn't lose it.) The end result was me having to break it all down and reverse/flip the outer rails and then re-fit the pin into the inner rail. (Which wasn't very hard, but I was lucky because it could have broken.)So long story short, watch your slide orientation before final assembly. The finished product works like expected and is very solid/sturdy, locking in both the closed and extended positions.

These are definitely pretty rugged drawer slides. I don't know if they will actually hold 440 lbs and not sure I want to test it. Glad I went with these and not the lighter duty ones. They are a little bit of a puzzle to install. Worked best for me to install the drawer slides in their mounting location......and then attach the drawer to them. The are corresponding holes in the rails to access the mounting holes so you will have to slide the rails in & out to line them up as you move from mounting hole to mounting hole. No directions come with these. I used them for a sliding equipment/recovery gear drawer in the back of my Jeep. I'm happy with the results, no rattling or movement when locked in the in position. Probably have 200 lbs or so sitting on them.

These drawer slides are extremely robust. If you need drawer slides that are longer then these are the ones for you. I’ll be buying more.

These slides are absolute BEASTS! Like, I mean Arnold Schwarzeslides! It's like the Hulk and Chuck Norris got together and decided to make drawer slides. Yeah, like that. The only negative thing I can say about them, and it's a super small negative, is that they are a tiny bit difficult to install. I actually built a plywood jig to hold the drawer in the right spot to get them aligned. They Do Not separate so once the mounting screws are in place, you have to remove them to take the drawer out. Other than that, awesome product! They are less expensive than most comparable slides I've seen too. Also, just a side note, mounting screws are not included. Overall, I am extremely satisfied. Five Stars plus overall.

I installed these on a pullout shelf to store my two metal chop saws on my workbench. They each weigh about 60 lbs. and I put both saws on the shelf. It pulls out and retracts very smoothly and without any stress from the weight whatsoever. Easy to install with easy to access holes in the tracks for mounting screws. Be sure to decide which way you want the release tabs to function (pull up or push down) and then mark them so as not to get them mixed up during installation. "Pull up" seems to work best for me but it may not matter. Very satisfied. These are far superior to anything you will find at Lowes or Home Depot.

These drawer slides are extremely durable and well designed! Worth every penny. I used them to install a sliding drawer for my cooler to slide in and out of a cabinet I built in my van. The locking mechanisms function superbly and keep the cooler locked into place when we are on the move. Might be overbuilt for my intended use, but I couldn’t be more happy with it!

Received quickly. Packaging not durable, not sufficient. Arrived with some damage. Nothing not useable, just irritating. The “rubber” used on locking levers is mangled, cardboard box torn and portion’s missing. Note the slide has a width of ~.7 each slide. So you will loose 1.4 inch of your drawer width. Clearly shown in product details.

Excellent product. After installing on a table top to slide back and forth for my steering wheel on my computer game so I would be able to get in and out of my chair. This worked perfectly. Now I can lock my table when I'm steering.

built a custom bbq slider outter rig for my RV bbq. These work great. very well built, thick steel, good roller bearings. would definitely buy this brand again for future projects.

Does the job well

Les charnières sont de bonne qualité et fonctionne très bien

These are a very sturdy slide. I bought these to carry a Honda 3000is Generator in my RV. I think the lighter duty would have been sufficient as the generator is only about 150lbs fueled up but these do it with easy. Very solid slider and very heavy. Id recommend them. I have 44 inch versions on order to more Rv slides and I’m sure they will do well.