Brass Sink Faucet Diverter Valve to Sink Hose Sprayer,Faucet Splitter for Kitchen,Sink Faucet Replacement Part M22 x M24,SBA021

Amazing faucet converter, easy to install and high quality

Looks great, easy to install, the water flows freely and shuts off easily. No leakage and wipes clean and shines right up. Great value for the price.

This valve worked very well. Its only flaw is poor sealing because of the low height of the washer provided. See the first figure for the installed valve with the required PTFE tape on the threads. Even then it leaked a bit as shown in the second figure. The leaking occurred in both flow directions.Initially we tried the black washer that came with the valve. However, as shown in the third figure, the shelf inside the valve top was so narrow that it did not support the flexible black washer enough. The washer just deformed into the diverter. A white, stiffer washer, also provided, did not have that problem but, as shown in the fourth figure, did not extend high enough above the threads to form a good seal with the faucet. The fifth figure shows the original aerator with its black washer sticking up above the threads enough to make contact and deform.Fortunately, the leakage was slow enough with the white washer and PTFE taped threads that using it was acceptable. The valve otherwise worked well. The handle turned easily with enough resistance to hold its position. The valve could even be turned part way allowing a flow from the faucet for rinsing hands of an operator while water still flowed though tubing to the hand held shower head. When the diverter went to the shower but with the shower head turned off, the leaking at the diverter did not increase much.Overall this works well and, with a little Teflon tape, is easily installed.

This review is for this adapter which cost $10.45 almost as much as the pet bathing tool I purchased here on Amazon sold by YTT for $10.99. It is absolutely worth every cent. I had a harder time removing the filtered cap off the faucet do to calcium build up. I used a silicone lubricant and a toothbrush to help remove and loosen the build up off the inner threads. After that, long nails and all it was easy to install. Tools and materials used: pressure pliers, Teflon tape for all the threads, silicon lubricant spray, old toothbrush and a small flat head to remove the old seal that was crusted in the faucet. You may not need all these things, but I must say I am extremely happy to have bought both these items. Hope this review and pics helps you, as I have been helped by so many reviews by others!

I saw one review somewhere that someone had an issue with their mobile home faucet plumbing not doing well with the pressure, but I couldn't remember where. Turns out, it doesn't matter. This should come with a disclaimer that it is NOT for mobile homes/RVs, as the plastic faucets and connections can't hold up to the back pressure this creates, even on the "faucet" setting, because this makes the faucet opening is too small for the water pressure. I'm just thankful that I had a bunch of water to clean up and an undersink cabinet to clear out and dry and not a whole faucet and plumbing to put back together. I first tried it on the soaking tub faucet, but thankfully it kept blowing off the faucet and I thought the threads were stripped on my fauce, so I only had a little bit of water underneath it.So much for making it easy, maybe one of the cheap "dog bath" hoses really will stay on. Hahahaha... :/ Otherwise, it seemed well built, but I couldn't tell you for sure.

The media could not be loaded. Finally got what I need I Was in Home Depot almost every day. Looking for a perfect adapter, because I bought from here something to devide the faucet, so I can clean the bathroom cover and for wife instead using a bouquet for her stuff. Will be nice to just put a hose. Anyway that didn’t work, the adapter was too big nothing fit. As I said before when to Home Depot a lot of time. Until I gave up did something crazy it work but no room on the sink. Bought this adapter, put it with my original male adapter in a minute it was done. I loooove it.Made sure you check the size of your faucet, by this adapter and the hose separate and you could have this in a minute and less that I spend in HOme DepotShe will like it

The inlet is a 15/16 -27 male fitting. There is no removable connector for it to fit faucet. Was not able to find a 15/16-27 female adaptor either on amazon or at local hardware stores also looked for a new faucet that it would fit on also not in that size. The valve seemed to be of fine quality just not able to find a way to make it work.

I used this as a shutoff valve by caping the bypass so that I have full pressure to my sink sprayer.It worked perfectly.