4.7uF 50V 5x11mm Electrolytic Capacitor 4.7 UF MFD 50 Volt 0.2x0.43in Aluminum Capacitors (Pack of 15)

The capacitor worked properly. I am completely satisfied with its performance and the purchase price. The users were my students no complaints were reported back.

Great value, good quality, A+.

Exactly what I wanted for a current project. Quality was good I recommend.

A little taller cap. Than the one I was replacing, but works perfectly

My air purifier suffered a power failure (apparently a common issue with this model). Went on YT and saw a video showing the stock capacitors have a tendency to go bad. Sure enough, after opening it up, I had all kinds of brown fluid on the board and other components near one of the capacitors.I really only needed to replace that one, but since I had so many from this kit and wanted a little extra soldering experience, I decided to swap them both out. Put it all back together and the lights disappeared and the unit acted normal again.Probably took me about an hour to desolder both capacitors off and solder new ones on (I learned flux is essential for removing solder - that's why my solder wick wasn't working well), but I saved myself a good $150 - $200 by changing these cheap components out. Also saved my unit from heading to a landfill, as it works like new again. Great value for the money!

The Caps I ordered work like a charm. I only needed one.It saved a 24 year old Pre Amp modeler unit that I did not want to part with.Now my Johnson J Station is alive and well thanks to this one capacitor.

Some other people have seen qc issues with these, but they all seem to be functional and within an acceptable error range for my uses.

Exelente funcionado muy bien