KBS Coatings 5500 Gold Standard Tank Sealer - 1 Gallon

My china grom clone had a leaking tank near the float , as is common with the china bikes. I didnt prep the tank at all besides a wipe down and letting it dry from all the gas that was left. I did 3 coats on the inside from the bottom of the tank to almost all the way up the top, and 2 coats on the outside only doing the bottom half of the tank. Each layer both inside and out was done with 8-10 hours of drying in between. The grey looks kind of bad compared to the black tank, but other than that the tank has held up with no leaks going on four months now. My gas mileage has also obviously improved immensly as a result. The can is a little hard to open and the sealant is somewhat runny so its hard to apply precisely and not making a mess. Disposable brushes is recommended and it somewhat comes out of clothes after a few washes but i recommend wearing work clothes.

Our stock tank pool was looking pretty rusty. This did the job! 8 foot stock tank, and a quart was able to do the inside sides and bottom. Ran out of daylight, but it looks great. Would purchase again. Hopeful that it’ll hold up.

This gas tank sealer was easy to use when instructions are followed carefully. It produces excellent results when fuel tank interior is prepared properly.I used this fuel tank sealer after repairing rusted out areas of fuel tank with sheet steel patches, fiberglass resin repair and body filler to bring fuel tank back to original contour and shape.As per the instructions, I removed the excess sealer using vacuum extraction, so there was even coating of sealer over entire interior surface of fuel tank.The pictures show how the inside looks and how the exterior looks after painting and clear coating.Thanks for a great product.

prrrrrrr fect

I have used this product before it worked great on motorcycle and atv tanks and lawn equipment too now I am going to coat my tractor tank.

Sealed my 1964 comet gas tank. Quick and easy.

After carefully following the manufacturer’s guidelines, I noticed a year later that this sealer starting to peal and chip off. Not sure if I did something wrong or this product doesn’t work. Either way, I won’t be buying it again. After the first coating was dried for two weeks in very warm weather, I gave it a second coat. Let that dry for at least a month before using it. I used the portable tank to drain my RV’s holding tanks, so it not leaking at the current time. Hopefully it only around the opening that is peaking and not down at the bottom where it was leaking from originally.

Follow the instructions to the letter and it works great. Try shortcuts and it a mess that is hard to clean up