915MHz LoRa Antenna Indoor 3dBi Gain Omni SMA Male + U.FL MHF1 Cable 2 Pcs

Excellent quality. Great price! Mandatory upgrade for the stubby antenna meshtastic kits come with.

I purchased this for a project for a school play prop using 2 RP2040 micro-controllers (Adafruit Feather RP2040 LoRa RFM95) , 1 for the prop and 1 for a remote. The receiving prop is a clock so originally I incorporated the antenna on the back, but I found that I could still easily send signals from the stage to the tech booth of the theater with only the connector cable attached to the clock (not the actual antenna) but with the full cable+antenna connected to the remote control. The distance is maybe 200ft so I'm extremely satisfied with the results. The build quality on these antenna seem excellent. Would purchase again if needed.

These are good Mesh antennas with a low SWR as long as you have them straight and not at an angle. When you bend them, the SWR goes wonky.

I’ve been using these 915MHz LoRa antennas for Meshtastic, and they’ve proven to be well-tuned for the 915MHz frequency used in the US. The signal-to-noise ratio (SNR) readings I get with these antennas are nearly identical to those from a known 2.5dBi antenna, so while they are advertised as 3dBi, I suspect the gain is closer to 2.5dBi. The hardware included is of decent quality, and the antennas perform best when used straight rather than bent at a 90-degree angle. For example, I have a PORTDUINO node set to CLIENT_MUTE on my desk in my basement office, and it consistently connects with nodes up to 3 miles away. These antennas are reliable, well-built, and a good choice for anyone working with Meshtastic in the 915MHz range. Despite the questionable gain rating, their performance and build quality make them a worthwhile purchase for DIY LoRa projects.

Great for Meshtastic builders. Comes with a long cable and great signal and the 915 MHz range. Good quality and good signal strength.

Bought these for more gain than the stubby antennas that came with my LoRa32 boards. These actually test well for 915 MHz (wider actually - see photo). This is with it pointing straight up. SWR got a lot worse when bent at an angle but likely due to not having a proper ground plane. Will be buying more

Nice quality. Significantly increased my reach.

I tested both antennae from the "Antenna&IPX-Cable" variant while fully straight/vertical, since that's how I would use them. One of them has a min VSWR of 1.095 @ 915.9MHz and below 1.3 across the 902-928MHz range. The other had marginally worse results, but still stayed under 1.4 VSWR across the range.

Funciona para lo que las compré