Key Fob Replacement for 2008-2012 Honda Accord Sedan(Not Coupes)/ 2009-2015 Pilot Car Keyless Entry Remote Control,KR55WK49308 35118-TA0-A00,4 Btns

I just needed an extra key fob for my passenger to be able to open the car door if we went shopping in different stores. After I programmed it, it worked like a charm. to program it you need to put the original key in the ignition and turn the car on (without cranking it) and momentarily pressing the lock button on the FOD. repeat this process several times etc.. the full explanation is show on You tube and it is also explained in this review section. Note: I used it on a Honda Accord 2009 V6 sedan.

I programmed the key using the ignition switch method and it locks and unlocks the doors and opens the trunk and turns on the alarm. I bought $140 key cutter and cut my own keys which go into the ignition, turn on the electrical, but these keys will not start your car. There must be an ID 46 chip That will send a signal to your car transponder, in the key. The ID 46 chip has to be programmed by someone with a special programmer and those machines are $$$$. You can bypass the car’s immobilizer with a $70 gadget but then that security feature of needing the ID 46 chip in the key, is gone. but the keys work as they’re supposed to. I just wish the ad stated that you cannot start your car. But you can do everything else.

I couldn't get this to program to my car so I took it to a locksmith and they said there's not even any chip in it to program! Absolute garbage.

Good build quality. Buttons have a nice tactile response. Operates from a decent range. For my purposes, this provides an outstanding value for the money spent.Bought this intending to use as a key fob, not a master key/spare key replacement. Programming for that purpose was very quick and easy, requiring no tools or devices. (Scroll to the end of my review for instructions.)!!!Be aware that if you want to use this to start the vehicle, you will have to have the immobilizer programmed and the key blade cut to match the original. Programming the immo DOES require a specialized device!!!To program the fob only:1-Insert working key to ignition cylinder2-Turn ignition to "ON," but do NOT turn it further. Do not start the engine.3-Immediately after turning to "ON" position, press the lock button on the fob one time. Red light on the fob should blink once.4-Turn ignition cylinder/original key back to the "OFF" position5-Repeat (in order) steps 2, 3, then 4. Do this about 5 times.Horn will chirp when fob is programmed

Worked with my 2009 honda Accord, and the programming key was easy-to-use. Now, we have to find a place that will cut it.

This worked well and the comment review with the multiple steps was successful for a 2014 Honda Pilot.What a great solution!To be clear, this is an uncut key that serves as a fob to be programmed to lock and unlock the car allowing you to use the vehicle key to start and drive. Great addition to the previously failing fob!

Once programmed, the key will lock and unlock the car but not start the Car.

Worked out well in replacing the old key fob. Compatible.