RealTruck BAK Revolver X4ts Hard Rolling Truck Bed Tonneau Cover | 80342RK | Fits 2024-2024 Ford Ranger 5' Bed (60")

All of the parts were included and no shipping damage. Instructions were very clear and following said instructions made the install relatively pain for this 85 year old. Two caveats: The rail cover created a problem for the clamps and the front bulkhead seal came up 3/4 of an inch short. The clamps could not function correctly with the truck rail cap in place. Top would not lock because the rail was tipped down slightly. Clamps kept slipping down or could not slide up high enough to raise the rail high enough. I removed material from the vinyl cap right below the bolt hole the width of the clamp. Clamps worked as designed after that and the cover locked down properly.

The functionality of this easy-to-install cover has exceeded my expectations. It is water resistant as advertised and very sturdy feeling. Two folds can be laid forward, then easily secured for transport, or you can fold three panels to lean up against the back of the cab, securing it for transport, and allowing for the use of the majority of the bed for items that cannot have a cover over them.

Nice flush flat fitting on 2024 ranger xl, would exactly say complete perfect fit still has very minor spot of water that trickles inside from some areas but a lot less from previous cover I had one I like the way it looks and fits on the truck

Went with this roll up style as opposed to the three piece flip models as you can still see quite well out the rear window with it rolled. Also can be removed without too much trouble by unscrewing four knobs, they're on tight, but can be unscrewed and top removed if you need that extra 10 or so inches in the bed. One of the plastic corners arrived with a crack, but called service and they sent a kit with glue and left and right corner pieces so all good there. Installed this myself and had no trouble, but I'm a bit more handy than the average Joe. Cover looks good installed. Recommended.

The product is probably fine but nothing but a QR code in the box in lieu of printed instructions? An $800 item should have come with 10 cents worth instructions. Beyond dumb.

delivered with missing pieces, couldn't even install. none of the instruction videos match the product i was sent. They all show a very thin seal for the bedliner to install first, but mine was almost an inch thick and doesn't allow for a flush fit. The clamps in the instructions show two separate pieces but I only received what looks half of each clamp.

I wanted a tonneau cover that provided some security and didn't block my view out the rear window when retracted. This cover meets my requirements. It appears to be very well made and looks great.The instructions that came with the cover were wrong. Step 1 of the instructions was to install the bulkhead seal. The instructions showed a rectangular seal. The seal that came with my cover was not rectangular and was asymmetric. The asymmetry made it unclear which way the seal was to be installed. Step two involved clamping the rails to the bed side. My clamps didn't look anything like those in the instructions. Fortunately, I was able to find instruction on-line that matched the components that came with my cover.

Not very hard to installQuality is not as good as the advertisedNot worth the money