







🛠️ The ultimate fix-it putty that works above and below water—don’t let leaks slow you down!
DecorRom’s 16oz (450g) black epoxy putty is a high-strength, two-part resin designed for fast, durable repairs both underwater and above. It bonds to metal, tile, concrete, plastic, and ceramics, curing in 30 minutes to a metal-hard finish that can be drilled or painted. Heat resistant from -50°C to 130°C and non-toxic, it’s perfect for professional-grade leak sealing, crack filling, sculpting, and crafting.










| Manufacturer | DecorRom |
| Part number | F16789 |
| Item Weight | 520 g |
| Package Dimensions | 14.5 x 6.6 x 6.4 cm; 520 g |
| Item model number | F16469 |
| Colour | Black |
| Material | Epoxy Resin |
| Item Package Quantity | 1 |
| Special Features | Strong |
| Specific uses | Repair, Sculpting, Crafting, DIY |
| Batteries included? | No |
| Batteries Required? | No |
M**.
Super Fast Delivery
Nice very fast delivery.Well packaged.Good Value.Would buy from again.No problems at all.GATW...Good All The Way
R**.
Happy with purchase
It’s not a glamorous product but it does what it says. I weighed the same amount of the two pastes and worked it with my hands as instructed on box. I used it for the leaking pipe under the sink. No leaks! thank goodness. Easy to use. Will purchase again if and when needed.
A**R
Hard Work.
When I first went to use this I thought I had a dodgy or an old batch as the putty was virtually impossible to remove, so much so in fact I had to check other reviews, which I never do before reviewing something and it would seem that this is normal as everyone had the same problem.Once you cut it out or whatever it takes quite a bit of mixing as well. This is not the same as the epoxy putty I have used in the past where you have the two rolls.Having said all the above it does do the job pretty well, I had to reconstruct 2 parts of the plastic hinges that had broken on our meter box door and it did that fine, so the hard work paid off.I have given 4 stars as it did do the job, but was a complete pain to remove and mix.
D**
Rubbish
Firstly very hard when it arrived tried to use on cracked tiles and was useless. Don’t waste money on this
M**W
A1
It dose what it says on the ad
A**S
All but dried out on receipt.
All but dried out on receipt.Ordered this hoping that it was going to be white as it was not clear, you get one white and one gray, worse still is that these are not sealed so the ones i have are fairly hard and dried out, so not as i would expect for a putty, mixing with the spatula was all but impossible. i had to warm a small sample up in my hands and then mix it between my fingers with the gloves on, i left this then for a good 30 mins and did not notice any change in its consistency and was still malleable on its surface, this may as well be hard playdough. i suppose for under water it will plug a hole effectively so would work as a fix (temporarily maybe).There was also no change in the temperature once mixed so again unsure if there was a reaction.Unfortunately after 2 hours it was still the same may be a little harder as it was cold but not hard one bit may be after 24 hour it would go solid but the listing states it should set within 30 mins.So as a putty to block holes i can see this working but only as a quick fix so would not recommend for a permanent fix.
A**N
Challenging to Use but Effective Once Cured
I got the 2 in 1 Epoxy Putty for some quick underwater and above-ground repairs, and my experience has been quite mixed. The product comes in two small plastic pots labelled A and B, which need to be mixed in equal parts to activate the curing process. However, I found the putty inside both containers to be rock hard and almost impossible to extract with the provided spatula. I had to resort to using an old knife to cut out the needed amount, which was quite an effort. Mixing the two parts was equally challenging; it took me over five minutes of vigorous kneading to achieve a uniform mixture, and that was with the surrounding temperature at a relatively warm 20°C.Once I managed to get the putty mixed, applying it was another hurdle. The putty is extremely stiff and sticky, making it difficult to form and shape properly. I used nitrile gloves to prevent it from sticking to my hands, but even then, it clung slightly to the gloves. Despite these difficulties, the putty did maintain the shape I forced it into and, after about two hours, it became pliable enough to make final adjustments. It finally cured rock hard after a full 24 hours, at which point it was watertight and could be sanded down for a smoother finish. I tested it on a cracked drain pipe and, to its credit, it held up well and showed no signs of leaks.While the epoxy putty is undoubtedly effective once fully cured, the strenuous effort required to mix and apply it makes it less than ideal for quick repairs. Additionally, the product's packaging could be improved; loose lids and cracked containers were common complaints among other users as well. If you are looking for a putty that sets quickly or is easy to work with, this might not be the best option. However, if you need a robust solution for a tough repair job and are willing to put in the effort, this putty does eventually deliver a strong, watertight seal.
M**K
Works as it should
Bought this to patch holes in our bathroom doors as we we're changing the handles from old oblong style with a locking mechanism to newer separate handles and locks.As the older ones were large this left unsightly holes from the pins going through the door, this putting wad easy to use filling the holes, sets very quick and a dream to sand to a smooth finish, after priming and painting, the finish is wonderful pretty much invisible.
Trustpilot
2 weeks ago
5 days ago