Baseus15W for MagSafe Car Mount Charger, Magnetic Wireless Fast Charging, Bendable Memory Titanium Alloy Car Charger Phone Holder for All Dashboard, Cell Phone Holder for Car & for iPhone etc

Really like this phone holder/charger. It holds the phone perfectly and I like that one can remove it when not in use.

Because of the bendable arm you can put this anywhere, and a large surface with good adhesive means it won’t fall off on a hot day. My only gripe is the LED ring. Don’t need it and can’t turn it off. It’s not too bright but annoying at night if your phone isn’t on the charger.

I swapped the old radio on my boat for an updated one with wireless CarPlay, and the radio is on the starboard (non-driver) side of the boat at the back of the "glovebox". This makes it rather inaccessible for changing volume, songs, etc. As a result, I wanted to mount my phone in a easy-to access spot at the helm (driver area). Unfortunately, there are no flat areas at the helm - everything is curved. This "car mount" worked great on a relatively flat portion of the curve. The ability to charge while attached is even better! The magnets is very strong and works very well with my iPhone 12 mini....with or without the MagSafe case.

This mount attaches to the dash with a black rubbery pad having adhesive on one side hook and loop fasteners on the other. The adhesive is clear is unbranded, as is the hook and loop side. So this could be 3M VHB on one side and Velcro on the other, or it could be something similar from somewhere else.The adhesive side of the pad is about 92mm long by 52mm wide for a total area of about 4,200 sq mm or 42 sq cm.The hook and loop side of the pad is about 71mm long by 37mm wide for a total area of about 2,300 sq mm or 23 sq cm.It has a blue glowing, pulsating, circle around the outside of in the mounting area. When a cell phone is attached, the light starts moving arround the circle. Tastes very. Some would find this light show “cool”, however I would find it distracting.The box says that the arm is made of “Bendable Memory Titanium Alloy”, while the box lists the materials as “TPR+Soft Aluminum+ABS”. I didn't find it significantly easier to bend or hold its shape than other bendable arm style mounts.With this design, you want to bend it and test fit it first, before you actually adhesively mount the arm. Once mounted, you can get some up/down tilt movement by how you bend the arm. But very little ability left/right tilt movement, unless you want to separate the mount from the hook and loop fastener (Velcro?) and re-stick it at a different angle.Includes a 1m USB-A to USB C cable, a metallic ring for phones lacking a MagSafe Style ring, and cleaning wipes.Suitable Applications:As a dash mount where, the arm attaches to the top of the dash the phone is mounted in front of the dash.Might also work as a windshield mount.Pros:Lots of adhesive area.MagSafe ChargingLess expensive than other mounts having similar features.Cons:No easy left/right tilt adjustmentNot Qi2

I have a case for my Pixel 9 Pro that has a metal ring on the back. It flips out, swivels, and is positioned to allow mag safe style charging compatibility. This charger does successfully charge my phone wirelessly when held by magnet. (Some wireless chargers do not have the "range" to bridge the gap between it and the phone due to the ring thickness, ring base thickness, and case thickness.)As long as the surface you choose holds the sticky tape well, this mount is very secure in its place but easily removable from the mount due to attaching by velcro.It has decent flexibility in that you can bend the tongue up or down quite a bit in relation to the velcro'd base. You also can impart a bit of twist to the tongue to angle your phone's view a bit. Not too much though. The tongue is very stiff; it will take some doing and two hands to bend this into shape but that's a good thing because it will then -hold- that shape.I'm getting near advertised speed and any discrepency could be down to my charger, the cable, or accuracy of the little watt meter I used. I'm perfectly happy though.I have several other Baseus products and have grown to trust the brand. Best luck.~Cheers!

Fast charger but not the best way to install

I've had this unit installed in my 2007 Honda CRV for the last month. It was a bit tricky to find a good installation point, as much of my dashboard's "textured" finish was not compatible with the adhesive mount, but once I found a smooth surface to mount it on, it adhered easily and has been strongly in place ever since. This charger does a great job charging my iPhone 14 Pro Max and allows me to plug in an auxiliary adapter cable for the CRV's aux input. Instead of choosing between a charging or aux cable, I can now charge and use the aux cable at the same time. I really like to color and brightness level of the blue ring around the perimeter of the circular charging surface. The flexibility of the charger's shape is another very nice feature - it greatly expands your options for phone placement in the car.This charger is doing an excellent job and a genuinely recommend it.

My old iPhone’s charging port popped out so I needed a way to charge my phone while in the car and at home. I unfortunately didn’t have a wireless charger available but was glad when I found this item because it would allow me to be able to charge my phone at any location. I recently graduated from college so my budget is still a bit tight so the need to buy only one charger was ideal. I placed the base of the charger on my dash board and when I’m done in my car I simply remove the charging ‘arm’ from its Velcro attach to the base. I had some adhesive hook and loop tape already so I used it to attach the charger to the phone stand I already had that didn’t have a wireless charging feature. Now it basically does! The Velcro attachment is very durable and despite removing and reattaching the charger multiple times, it has not shown any signs of weakening. It charges my phone relatively quickly as well. Overall, I am happy with this charger and highly recommend.