Lifegard Aquatics3/4-Inch Double Threaded Bulkhead

Quick, easy installation and leak free operation. Much cheaper than I could find elsewhere for a rain barrel fitting. I'd read reviews about people breaking these on install. Not sure how that would happen. Everything worked well for me. I used 4 of these for connections on rain barrels. Needed an adapter to hook up a garden hose and then all done.

Used these for a batch of emergency water barrels for our Oakland, CA neighborhood. They worked great even though the bulkhead screw + spigot ended up costing more than the barrel itself! (BTW here's the secret to making this work if you have a 2-bunghole barrel and you don't want to cut the whole top off to reach in to manage the installation: dangle a string through one of the bungholes into the barrel, pull it through your newly drilled hole near the bottom, and then slide the bulkhead screw along the string down to the hole). A small bead of silicone in addition to the included rubber gasket ensured a 100% watertight fit. A brass lead-free garden hose spigot screwed in perfectly to the outboard end of this part.

I bought two of these to install drainage holes in the bottoms of two 55-gallon plastic barrels, which I will be using for collecting rainwater and let me tell you, these saved me quite a few dollars(with amazon prime of course). They have the same product at menards, but its over 13 dollars a piece!! One word of advice though, DON'T tighten down the lock nut until you have a fitting screwed tightly into the end opposite the external thread. I loosened up the fitting that I had screwed in there AFTER I had already tightened down the lock nut and ended up snapping the part in half right at the bottom of the external thread. I was quite upset with myself... anyway, they're good quality, all the parts are hard PVC, and it includes a sealing washer... ALSO, these will fit in a 1-3/8 hole or a 1-1/2 hole diameter (which is what I used)

I do recommend this as it is high quality definitely other cheaper options but I did like this one since I lt came quick since my one was leaking and needed a new one highly recommend if you want something high quality but make sure you get the right size because I made that mistake when first buying it so please check yours before buying

Used them to plumb a salt water drilled tank. Worked just as intended. Zero leak, nice quality. 5 star!

I actually used a few of these in a weird fish tank I built with an EPDM liner for my greenhouse. Coupled with brass fittings, they allowed me to run pump hoses through the wall of the tank rather than out the top of the tank. It seems to have sealed against the EPDM liner perfectly, and I left the rubber washer on it in case that would help it seal, even though it was going to press against rubber on the inside. All I had to do was drill a hole in the plywood large enough for the threaded portion to go through, and the nut tightens down on the outside of the plywood. I'm very glad I found these things.

This drain plug works great. The plug was easy to install. I use these plugs for my turtle ponds.

It's a quality product but I was hoping it would be threaded further in so I could look off the end. Just don't have the room. Build is good

El material es bueno y esta muy bien hecho

Installed it in a plastic rain barrel. Works great.

Perfect replacement for fixing leaking/cracked fitting in rain barrel

Muy buena calidad

Excelente calidad, llegó en tiempo y forma