Yibid Universal Mini License Plate Tail Brake Light Tag Holder Folding Bracket Mount for Motorcycle Suzuki Kawasaki Ducati Honda Chopper Bobber Racer Cruiser Dirt Sports ATV 4x4 Off Road Street Bikes

I should have known better, but you get what you pay for. The material is very cheap. I had to extend the pre-dilled holes to fit with my motorcycle, which was not a big deal. But after have it holding my plate on for two rides, the pin holding the two parts together (the joint which allows it to swing) vibrated loose and my plate detached from my motorcycle. The only thing keeping it attached were the wires for the illuminated LED bolts I use to secure the plate to this bracket.All in all, do NOT put this on a motorcycle. It might work for your child's bicycle vanity plate, but will not work for a motorcycle.

First of all it was a perfect fit for my '85 Honda XR250R. Your bikes fender shape will depend on the fit. Secondly, after making sure that the lock washers are fully compressed, and using blue Loctite it shows absolutely no indication of loosening, like many reviewers have noted. I have caught it on brush a few times, and there is just enough friction in the pivot area after tightening per above that it can still rotate up after impact, and rotating it back down has yet to be a problem or caused the pivot point to loosen. As a result of the reviews indicating that they lost their plate because this thing fell apart I attached a small wire to the plate and secured to a side frame member, but that has yet to come into play. Can't be beat for the price either!

Kinda cheap plastic housing but did the job. I actually combined 2 of these to make my small trailer legal. But for the price, it did what I wanted it too. The grommet that guards the wire into the back of the housing wasn't installed right and very cheap. So I just siliconed the shite out of everything before install.But the LED's are bright and work as they should. They have a dim running light, and then a bright active brake light. They responded well for my application as a trailer light set with brake, turn, and hazard signals working correctly.

I gave it 3 stars because it is as described, but didn't work for me. On one side it fits a normal moto plate but the other side isn't wide enough to mount on my tail. There isn't enough bend in the hing for it to sit flat when mounted. The worst issue is that it is held together with bolts that loosen every time you swing the hinge. If you use locktite it could work, but the point is mute since I can't fit it with my aftermarket tail.

It is hard to tell from the photos, but the two holes drilled on one of the arms is not the standard size of a motorcycle license plate. Both arms should have the oval cutouts like the lower half, or at least make the holes the width of a plate mounting holes.

This worked perfectly on my wr250f. Had to rig it up a bit, but it does the job,

I jerry rigged this under the tail on my bike. Came out good, but beware the hinge joint will get destroyed in seconds. Be prepared to glue, weld or sauter.

Very light, the screw needs to be improved because keep on getting loose. I had to make another hole to make it fit better.