Newsmarts 4 Pcs Car Door Weatherstrips Window Weather Stripping Moulding Trim Seal Belt for Toyota Highlander 2008-2013 Part Number：72410-T2A-A01、72450-T2A-A01、72910-T2A-A01、72950-T2A-A01

The product arrived in super condition. An Amazon box on the outside, an inner box and then a very sturdy round cardboard tube which protected the contents. The installation of the product was simple although the some rubber on a couple of strips needed to be trimmed to properly fit when installed on the door. Look carefully as to where the strip will lay in relation to the metal frame for the rear roll down window and back fixed window. Mine need a slight trim with an xacto knife to allow the seal to lay flat on the door edge. Other than that minor trimming the strips fit well and look great.

These are fantastic and fit just as well as OEM. I had received one of them with 3 dents in them. I contacted the seller about it and was promptly sent a whole new set and just needed to send back the damaged ones. It takes some effort to get the old ones out but these new ones installed easily and look great.

The original weatherstripping was cracking and falling apart. I purchased this weatherstripping kit along with some plastic pry tools (sold separately). I used the plastic tools to remove the original weatherstripping. This was the most time consuming part of the process. After I cleaned the area I put this in. Very easy to install - just push into place until you hear the click. It's a huge improvement cosmetically and will also help keep water from getting into the doors.

Was trying avoid spending a couple of hundred dollars for the OEM replacements. I purchased another aftermarket option off of Amazon and compared the two. This one was definitely better in construction and cost less than the other. Process was easy. Key is to apply force from the glass side as well as the end when removing and installing. There was some residue left after removing the protective layer but it came off with a little effort. My only complaint is that the fit is not 100% OEM but for the money well worth it.

First off, these fit perfectly and were a helluva lot cheaper than the OEM ones. I watched a couple of helpful videos on Youtube for the installation, including one that showed how to remove the two side mirrors, a necessary step.I already had a trim tool kit. I wound up using about 3 different tools because the black tar/adhesive that was underneath the original pieces got over everything. WD40 worked great for cleaning everything up.The trim pieces arrived in a large mailing tube, that was inserted into a rectangular carton, which was then inside an Amazon shipping carton. Everything arrived in one piece, nothing broken, and no missing clips.As others have mentioned, there's no labeling on the individual bags to tell you which piece goes where. The two shorter pieces are for the rear doors. Once you remove one, you just need to visually align the black end clips with their proper place on the door and you'll quickly figure out which is which.When removing the rearview mirrors, it's helpful to have an extra someone to hold the mirror out of the way so that you don't need to disconnect any wiring. Other than that, the front ones go on just as easy as the rear ones.I'm so happy not to be looking at the crumbling rubber on the old trim pieces. This is definitely an inexpensive fix for an unsightly issue.

These fit perfectly on our 2008 honda crv. Dealer was asking for over 600 for weatherstripping moulding for all 4 windows, hight recommended

Loose fit, no adhesive as advertised, one molding live broke at the screw mount. But hey it was a quick swap. And also don’t forget it’s not all the window pieces.

The Honda dealership sells this window weatherstrip moldings for $300 for one front and one rear door. Installation was an additional $180! A little research led me to these and the recommended tool kit. I bought them right away.Removing the old, worn weather strip molding was a bit more difficult than it appeared in YouTube videos, but it was manageable with a little patience and persistence.Installation of the new moldings was fast and easy. All in all, removal of the old moldings and installation of the new took 40 minutes at most. Highly recommend these.