would this work with concrete/ brick dust? Looking for a way to extend the life of my filters and wondering if this is the 1% that makes it through

Look at it this way: 1) It's a tool, so you can expect wear and tear over time, and even to have to replace it, if it gets a lot of use and abuse. 2) If it lasts a year and, during that year, knocks down even fifty percent of what's going into your collector, you've had to empty and clean the filters on the man system half as much. 3) As tools go, I consider the price of this one fairly cheap. Now, some facts: 1) I was using a Paint Shaver Pro, which is like an angle grinder with three carbide bits on it, to shave paint off siding. It put out a LOT of dust. The Paint Shaver required a vac system, to avoid burning it up and a simple, 16 gallon shop vac did a good job of collecting most of what the Shaver produced. However, the dust would plug my vac in 5 minutes or less. To solve the problem, I built a water bath pre-filter, which worked, but cleaning it was messy, and the dust foamed, big time. While reading a woodworking magazine, I saw an item called a Dust Deputy and, after considering the information, decided to gamble. I tossed Oneida a couple hundred for the metal version AND HAVE NEVER LOOKED BACK. The little Deputy spun most of the powder from that and even sheet rock sanding out so well, I was able to switch to a much smaller, but still pretty powerful vac. The Deputy did so well, it inspired me to buy (invest in) a 3 horse Dust Gorilla and, later, a Super Dust Deputy for the shop and I'm thinking of adding this Super Dust Deputy XL to one of my Jet 3 horse collectors. SIDE NOTES 1) The Super DD pre-filters one of my two 3 horse Jets, but does double duty as a lawn vacuum system. To that end, I mounted the SDD on a large, plastic drum, installed handles, wheels, so it can be moved around easily. I bought a little Harbor Freight collector just for the purpose of vacuuming the pine cones from the lawn, and leaves from the flower beds. It, also, picked up paint chips from the gravel around a commercial building. It did a great job of getting the chips, but also grabbed about a gallon or two of gravel. However, thanks to the SDD, none of those things went through the impellers of the collector. 2) To aid in monitoring the fill level of the barrel, I installed a long Plexi view port using rivets and silicone caulk. Even when using clear bags, I am able to see how full the barrel is. 3) I use clear, light weight lawn bags to line the barrel. To keep from sucking the bags up, I just made a cage from fencing I bought at a Big Box store. As long as you use the cage, the bags will work fine. Too, when emptying them, do not try to lift the bags out. Instead, lay the barrel on its side and let the bag and dust pour out while you coax it by tugging on it. 4) Air leaks. Air leaks are a BIG deal with these cyclones. I had a couple TINY ones and, within an hour of running, the vacuum would collapse the, relatively, heavy cage. To find the leaks, I bought some incense and tracked down where the smoke would disappear into the barrel, as the system ran. The insulation noodle I used to seal the top worked fine, but the caulk must have shrunk just enough to leave a couple pin holes. Though tiny, since filling them, the bag and cage have quit collapsing.

Can this unit handle powder dust like from drywall. We want to put it on a conveying system for gypsum powder.

The simple answer is no. But, adding the Dust Deputy will vastly extend the life of filters or collection bags and save you money in the long run. The dust deputy, like all cyclone separators, is only part of a multi-stage system. Usually as part of a two stage system where the Dust Deputy separates around 90-95% of the particles. Very fine dust (like the dust from gypsum board) will likely pass and need to be collected in the filtration bag normally attached to the vacuum unit. The next issue is the type of vacuum. If a shop-vac, there are bags you can purchase at your local box store specifically for gypsum dust. If a larger unit like a wall mounted system, then you will need to ensure the filter, or filter bag as the case may be, is fine enough for gypsum dust (usually 1 micron or smaller). With most wall mount units the bag both collects and filters. High end units will have a filter separate from the bag. Normally the bag that comes with wall mounted units will be in the 3-5 micron range. Also, if the wall mount unit uses a filtration bag (instead of a filter & bag), then the bag will clog periodically. You will notice this with a loss of suction, probably every half hour or so depending on use. However, all you have to do is turn the vacuum off momentarily and shake or strike the bag to settle the clog. Then turn it back on and continue. If you need more info reply to this answer and I'll do what I can. Hope this helps.

Whats the difference in the dust deputies besides the prices? They all claim 99% dust removal but vary a huge amount in dollars.

It all depends on the hose size. If you are using a dust collector with a 4"+ hoses you need the larger dust deputies. If you are using a shop vac you need the smaller hose inlets.

Desertcart Logo

Some deliveries may take a little longer than usual due to regional shipping conditions.

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan

Customer Services

About Us

Customer Support

Our Other Brands:Hewyn|Selfship

Reviews

O**T

Does exactly what they claim.

Been putting off buying this because of the cost, but, man what a difference. I hadade my own and it worked ok, but not as efficient as this. My old Harbor Freight collector pulls more dust and is quieter than ever. Easy to install, too, everything you need except for a container. Keeps your fine filter clean which keeps the air flowing better for longer.

26.05.2025

D**U

Jamais commandée cet article!!

Aucune idée comment c'est créer cette commande???

6.06.2017

A**R

This works with a wide range of horsepower that can be applied. Don’t cheap out on power

This is the gold standard for an extractor for people who care about cost

19.04.2025

M**S

Support

The seller was very helpful in any concerns. Works very good, no dust getting past this cyclone. Have a 6inch line hooked up to it.

22.05.2024

S**O

Inlets aren’t ready for hook up

Unfortunately I haven’t been able too use this item yet, but I’ll give you my 1st impressions. Well one thing I’m sure this will do a great job just as my small dust deputy on my shop vacuum which is absolutely great and has saved me a ton in vac bags.. But what I don’t understand is the outlet and inlet sizes, I got the 6” and no 6” hose fits it. The top port is 6-3/16” and the other is 6-1/8”...?? This is a bunch of BS if you ask me. Because it’s obvious that they want to make you by more fittings to use it. Just like everyone else in dust collection equipment, making a bunch of odd sizes in an effort to get you to buy the extremely expensive dust collection Specific plumbing.. so I’m frustrated to say the least. An even though they sell some of the reducers from Oneida here on amazon they don’t sell the actual adapter fittings for 6” here so I had to order them directly from Oneida for $40 for 2. And I have no idea when I’ll get them due to all this virus BS. It’s such a pain in the rear, because it’s pretty expensive however an whatever you use for plumbing the lines without having to run around trying too figure what works an fits without buying extra crap and spending time an money custom building fittings and what not.. But I do know this cyclones work wonderfully just wish it wasn’t either super expensive for actual dust pipe and fittings or super frustrating making something else that’s a little cheaper work.

14.04.2020

ASIN	B011DI6FE2
Amperage	25 Milliamps
Brand	Oneida Air Systems
Brand Name	Oneida Air Systems
Color	ブラック
Control Method	Touch
Customer Reviews	4.5 out of 5 stars 89 Your Review
Filter Type	サイクロン。
Finish Types	光沢
Form Factor	キャニスター
Global Trade Identification Number	00852811006708
Included Components	サイクロン、ガスケット、蓋金具。
Indoor Outdoor Usage	Indoor
Is Product Cordless	No
Item Dimensions L x W x H	95.3L x 48.3W x 95.3H cm
Item Weight	3.86 kg
Manufacturer	Oneida Air Systems
Maximum Suction	850 Feet
Model Name	FBA_AXD002030AXL
Model Number	AXD002030AXL
Motor Horsepower	3
Number of Items	1
Number of Power Levels	1
Other Special Features of the Product	Lightweight, Portable
Portable	No
Power Source	Battery Powered
Recommended Uses For Product	ハードフロア、裸床、木工。
Series Number	2030
Special Feature	Lightweight, Portable
Style Name	XL 6インチサイクロン。
Surface Recommendation	Hard Floor
UPC	852811006708 646437004190
Wattage	2238 W

Oneida スーパーダストデピュティー成形サイクロン XL AXD002030AXL

Details

Description

Specifications

Reviews

Common Questions