Eclectic Products E6000 237032 Craft Adhesive 2 fl oz Clear

アイロン接着の剥がれた刺繍に使用 ヨーグルトの上蓋に出して爪楊枝でちょいちょい塗ってたらまぁ乾くし粘る位迄固まるので最後は本体からちょい出しで直で。 接着剤としてはデニム地にもすぐくっついたので粘着力は群を抜いてるのでは 指についても指同士擦ってりゃダマでとれるし繊維関係に絞って使えばリピートする。 E6000 FABRI-FUSEが生地用だけど５千は高い 国産気にするならゴリラ気にしないならコレか

bought this glue because i used it before, and knew what i was buying. the package was sort of all bumpy and glue metal tube looked squeezed while package was sealed, and there was a rub visible on the tube which made me afraid there was a hole too. but when i opened the package, there was no smell of glue, so it's good without holes. the mouth of the tube was also not damaged, and glue can run smoothly out. i bought this item in condition described as "NEW", and it also said " 新品・未使用の商品です。" in conclusion, although the package appeared to be well-traveled, even i bought it as "new" and not as outlet, it does not interfere with the product function.

Works as advertised. For me a good point is that it last long without hardening up after first use. Still easy to open use again. google 翻訳 宣伝どおりに機能します。私にとって良い点は、最初の使用後に硬くなることなく長持ちすることです。開けるのも簡単で、再び使用できます。

大きいのでどんどん使えるが、使いきれなかった時は乾いてしまうので困った。 ラインストーンやビジューを貼るのに購入し、しっかりと着きました。

良かったです

Very fast service. Very good glue for various repairs. The glue holds very well. I have tried many others brands and they only lasted a short time. Very good. Great for shoes repairs.

屋外でちょっとした段差に自転車通路をホームセンターで買って来た部材をDIYする時にコンクリートと金属、コンクリートとゴムの部材を固定するのに使用しましたが、問題なく強力に接着でき、自転車を通過させても雨降ってもがっちり固定されたままで良い製品です。

新体操のストーンを着けるのに購入しました。 使いやすく、透明で一度着けたらほとんど取れません。 すごく良いです。

Like all rubber cements, it’s just rubber mixed with a volatile solvent. In this case, E6000 is SBR (styrene butadeine rubber) mixed with tetrachloroethylene. Nasty stuff, but then all rubber cements are dangerous to some extent. Be sure not to get it on your skin and when you do, rub it off and wash up with soap and water immediately. I used this for a large project. So far, I’ve glued wood, fabric, metal, plastic and glass together. I roughed up the surfaces with sandpaper or a file or just a utility knife before applying the glue. I used the glue liberally, smearing it on as much surface area as possible. The excess that oozes out is easily wiped away. For the wood, metal and glass, I dipped a corner of a small rag in acetone and used it to clean up. I used a clamp to put pressure on the two objects being bonded. For flat objects l used a stack of books. I left it under pressure for 24 hours in a 55 F degree room and it bonded well. I let it cure for a few days before testing the actual strength of the bond, which is impressive. The heaviest item I used this with is 11 ounces and it is held by a 1 x 3 inch Velcro strip between wood and plastic. If you consider the amount of pulling force each time I yank the Velcro apart (at least a few dozen times now), it’s held up really well. I bought the black version, which applies and dries pitch black. I have no experience with the clear and white one. I grabbed a few plastic butter knives from a certain large fast food chain and use that to apply the glue. If you do use something similar like Popsicle sticks, then twirl it around a bit like you might with spaghetti on a fork. The glue tends to string up a bit as it hits the air and gets pulled apart. Generally, I prefer using a two part epoxy as they create stronger bonds, but this seems to work well enough for lighter weight items. That said, I did not use this on anything that flexes like clothing or on small items like rhinestones. I mostly glued LED light strips, battery packs, small solar panels, pieces of glass and tiles, cables and other things. If you're doing something similar, I recommend this as a viable alternative to an epoxy.

Holds craft diamantés on longer than other glues, a little bit stinky so use in well ventilated area. Good value for money.

Nice rubber based glue perfect for crafting

Great stuff. I glued one shoe with shoe goo & the other with this on my practice cricket shoes. Had 2 training sessions so far & both still holding strong.

Works well, just remember to recap it as it dries up if left with the thin nozzle