PLA+ Filament 1.75mm, Enhanced Toughness, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Polylactic Acid, Black

Filament works well. Good adhesion and few failed prints. Strength seems ok. I've had problems in the past with pla filament that breaks in storage if placed under any strain, e.g. if you thread the end through holes in the spool to stop it unwinding. This pla+ seems to behave better.

Good filament, I used this for quite a large print without testing it much and the results were good. I really admire the usage of cardboard spools, since it minimises plastic waste in an industry where we do inherently waste a lot of plastic.

I always find Esun PLA some of nicest Filament to use as a beginer. I have had no problems with clogging, or Adhesion as long as you stick to the directions and the advised temp range you'll be fine. prints in normal pla and the matte pla always have a lovely finish and texture and I have found the Colours to be very consistant, and above all it's great value for money.

“Reliable PLA+ with minimal fuss—ideal for both benches and showcase pieces.” Printed Benchy and phone stand—low warping, no clogging, clean layers at 205 °C. Better toughness than standard PLA. Pros: Good dimensional accuracy (+0.03 mm), consistent color, tough prints Cons: Could improve spool hub design—gets tangled if not careful. Would I buy again? Yes when I want a step up from basic PLA.

I’ve been using the eSUN PLA+ Bone White filament for several projects, and it consistently delivers smooth, clean prints. The dimensional accuracy is spot-on, so layers align perfectly and parts fit together as intended. It’s tougher than standard PLA, reducing breakage during handling, and it feeds through my printer without any jams. Overall, excellent for both hobbyists and more detailed 3D printing projects. Pros: Enhanced toughness reduces snapping and warping Dimensional accuracy of ±0.03mm ensures precise prints Smooth, consistent extrusion Works well with a variety of 3D printers Good color consistency (Bone White is nice and even) Cons: Slightly more expensive than standard PLA Some stringing can occur at higher print speeds (common with PLA+) Requires proper drying if left open to avoid moisture issues

Hands down the best filament for printing minis. Combine with Painted4Combat's Resin2FDM plugin for Blender, a 0.2mm nozzle and decent set of profiles (currently using Fat Dragon Games profiles) and this filament perfectly closes the loop. The quality of the finished minis could only be dreamed of 18 months ago and eSuns PLA+ is a large part of the reason for that. Can't recommend enough.

Generally i have always used ESun Pla Plus, my last few purchases have been problematic and I wonder if its the reason prices have dropped but if so no excuse to send people products that have not been wound onto the spools properly. I run a small store and having to constantly unwind and rewind un twisting the Pla is annoying to say the least. If this continues I will be forced to use alternative products. Sort it out ESun. I have had Problems with Black and Silver so far. I purchased several Whites as well so I can only imagine the issue will be there too.

This is my absolute go to filament for cheaper prints. Using the bambu labs A1 and the fillament configs available for download on esun website, it prints brilliantly EVERY SINGLE TIME. Printed about 4kg of this in the last 6 weeks and not once did I have issues. Their petg is good as well but for a little more you can get the petg cf and that gives out some extremely good prints. Tried other brands but not as good, not even the bambu ones. Needs drying and kept reasonably dry, I keep most of my stuff in air tight boxes with some silica gel but the pla I just keep in the drier itself with some silica inside and I've not once seen any strings.

Çok beğendim

Correspond complètement au descriptif. Un rouge franc et brillant. Le taux d'humidité est bon et bien scellé.

I’ve used a lot of different PLA+ brands, and eSUN continues to be one of the most dependable options out there. The filament feeds smoothly with zero tangles or breaks, and the diameter consistency is spot-on, resulting in precise, clean prints every time. Layer adhesion is excellent, and the surface finish comes out beautifully glossy without needing any extra tuning. This PLA+ also has great toughness compared to standard PLA — parts feel stronger and less brittle, perfect for both functional prototypes and aesthetic prints. It sticks well to the bed without warping, and cleanup after printing is effortless. If you want a filament that performs well across different printers and print speeds, eSUN PLA+ is a solid choice. Great value for the quality and reliability!

Great print quality and superb adhesion.

Le filament PLA+ eSUN est une valeur sûre que j’utilise régulièrement pour mes impressions 3D. La qualité est constante, avec une précision dimensionnelle de ±0,03 mm, ce qui garantit une extrusion fluide et des couches bien régulières. L’impression est facile, avec une très bonne adhérence au plateau et peu, voire pas, de warping. Le PLA+ offre une résistance légèrement supérieure au PLA classique, ce qui est appréciable pour les pièces fonctionnelles tout en conservant une excellente qualité de surface. Les impressions sont propres, solides et avec un beau rendu final. La bobine de 1 kg est bien enroulée, sans nœuds, et compatible avec la majorité des imprimantes 3D du marché. Que ce soit pour des pièces décoratives, des prototypes ou des impressions du quotidien, ce filament répond parfaitement aux attentes. Un excellent rapport qualité-prix et un filament fiable que l’on peut utiliser en toute confiance. Je recommande sans hésiter, aussi bien aux débutants qu’aux utilisateurs expérimentés.