EAZ LIFT Camco Eaz-Lift Elite 800lb Weight Distribution Hitch with Height Adjustable Forged Shank (48052)

**UPDATE (02/13/21): with the bolt package received (see update below) I was able to build the hitch (have a partner, and get the right tools) and attach to a 2017 Explorer 4WD to tow a 2021 Wildwood FSX 178BHSK travel trailer (3800#). Hooking up the unit was a trial-and-error process, having no experience with hitches or towing. An hour later I had the hitch on, chains fastened, and a fairly level tow vehicle and trailer (next time I’ll add one more link to level it even more). My haul was 150miles to my RV storage spot and the drive was very stable and the trailer didn’t pull or surge a bit during acceleration or braking. I’d recommend this device to anyone towing, especially with an SUV.**UPDATE (02/08/21): one email to Camco and 15min later I have the missing bolt package on the way, shipped 2nd Day air! GREAT CUSTOMER SUPPORT! Bumped to 3 stars for the great outcome (will likely be adding more), and will add more to my review once assembled and used.**Bought a "Used-Very Good" hitch, which was noted to include all parts and original packaging (though packaging may be damaged), to save 40-50% of the new cost, thinking it's going to get banged up anyway so who cares? Product arrived - packaging somewhat damaged but not bad. Upon inspection of parts I found them to be in excellent condition - very little wear visible, if any, leading me to believe it was either a return or previous owner didn't use it. Unfortunately the BOLT PACKAGE was missing, which contains TEN bolts, nuts, washers, and pins to assemble the hitch. Without these parts the kit is completely useless and cannot be used at all. Will update the review is the missing parts are sent (requested already), otherwise 1's all I can do for an inoperable product.

I feel very safe pulling my camper with this hitch system.Compared to the gauge of steel on my trucks tow package and the tow tongue on my camper the hitch system will long out last both.Installation - as long as there mount points on the trailer tow tongue are clear of obstructions its really easy. I unfortunately had some modifications to do, had to grind off the LP bottle mounting rack and weld it back on slightly forward of original position. if your not good with a welder or know someone who is just measure before you buy. Relatively really easy to mount and set up. or take it to your local dealer/garage.Might be a little fiddley when it comes to hooking up and unhooking, But I've used other similar systems... basically same same when it comes to fiddleyness :-).All in all, yes worth the money, quality is as good as it can be.

I’ve used this with my 11,000-12,000 pound camper for over 10 years now, and it has just recently got to the point where the bars need replaced. The other parts are all still completely functional, and work as they should. It has had a rough life, commonly abused on 4x4 roads, very uneven terrain, it’s been strained in every direction. The adjustability made it super easy to keep the distribution the same when switch between different height trucks. Would definitely recommend this setup, it has been great to me.

Priced out similar hitches and this seemed to be the better value. It was somewhat easy to install and does a good job of distributing the weight of the camper. Only downfall is that I had to go buy a 250lb. torque wrench to properly torque the bolts. That added an additional cost to the project.

If you're towing a trailer which is more than 50% of the tow vehicle weight, you need this. For me it was the right tool for the job, towing a 7,000 lb tandem axle cargo trailer with my yukon xl k1500. I foolishly towed it 300 miles with a standard hitch and it was a harrowing experience to say the least. Had this hitch on the return trip and barely knew it was back there. No squat, no sway, and the steering axle clearly felt more planted. With a load distributing hitch my reciever is rated for 12,000 lbs. This one is good for 8,000 which is just a little more than what my truck is rated for, so it's perfect. I don't want the hitch to be the weak link in the towing equation, literally.For installation, I used a 1/2" ratchet with 14, 19 and 28mm sockets and a 10" crescent to hold the bolts. You'll need a very big wrench to install a 2 5/16 ball with a 1.25" shank. I finally had an excuse to break out my 15" crescent and giant Channellocks for that one.Being the thirty-something guy I am, I still haven't acquired the wisdom and patience that makes you stop and read the directions, lay everything out and think it through ftom beginning to end before starting. I just ripped open the box and started bolting things together. Much to my dismay I discovered the drawbar had a 1.25" hole and my 2 5/16 ball had a 1" shank. Then came the most arduous part of the process, driving around town for an hour looking gor a 1.25" shank hitch ball. Had I taken my time and inventoried the parts, I would have discovered beforehand that the kit provides a bushing which will allow you to use a 1" shank in the 1.25" hole. Doh!!Installation was pretty straightforward. The hitch is highly adjustable, both with angle and height. I ended up installing mine with the hitch shank's vertical length down (as pictured), since my cargo trailer is low to the ground and the Yukon is not. With an RV, which tend to have the frame a bit higher off the ground, you'll probably install it with the longer vertical length up, which is how the instructions show. It didn't come with a sway control, but has provisions for one. I didn't need one.Hooking up and disconnecting this hitch only takes a minute longer than a standard hitch. But it is HEAVY! If you're slight of stature you may have some difficulty lugging this around.I would have given 5 stars if it were made in USA. I don't usually bolt Chinese parts to my vehicles, especially critical components, but there's no American choice here that I know of. The welds and powdercoat look decent enough.Some other products which have made my truck into a darn-good tow vehicle and I recommend you check out include: Tekonsha P3 brake controllers and Air-Lift 1000 supplemental airbags for coil springs.

The quality seems good but disappointed that the hitch ball isn’t included. I thought it was included because it appears in the picture and had no disclaimer on the photo. Also nowhere on the instructions does it say what size hitch ball it takes or the part number it needs.

I've only had the opportunity to use this set up once as it was purchased late in the year.Without this system my 25' travel trailer was very unsettled behind the truck, with this and a friction sway control bar the trailer stays nicely behind the truck, cross wind and passing tractor trailers are now manageable.Assembly and setup are not too hard if you have the proper tools. Trickiest part for me was finding a parking lot with a level surface to use for proper set up.Quality seems good, looks identical to other systems at 2X the price.

Decent product- not super easy to install- not the worst!

It is awesome !! Takes a lot of weight off the truck, easy to install to, I would recommend this product to anybody !

Awesome price , Thanks FlyRod .

None