Korky 818MP QuietFILL® Platinum Universal Toilet Fill Valve & 2" Toilet Flapper Kit, Silver

Yes, it is all made of plastic. That is why it is affordable. The good news is it is very simple to install, almost plug-n-play. Read the manual to get more details. Now, my toilet is not leaking water

I used this to replace an existing Am Standard OEM flush valve that always has a trickle after filling the tank. My system pressure is normal - 65 psi - so that was not the issue. Maybe it was the flapper not making a good seal. Anyway, this unit fixed the problem. It is adjustable for the 1.25 gal low gallon flush tanks, and for older normal 2 gal flush tanks. Easy to install and adjust. Only took 30 min, including testing and adjusting. Be sure to leave just a little slack in the chain from the handle to the flapper. Too much and you will not get a complete flush and re-fill. Great product !

My fill value was not turning off which at first thought the float was set to high. After further inspection my float valve was the correct height but the valve was leaking . . . evidence was seeing water movement in the bowl. I replaced my fill value with this Korky and problem solved. One comment on this kit, unsure its a fault of the product, but the Flapper from being stored in the package (unsure how long) seemed to be curled. As a result it did not want to sit completely flush and caused the toilet to have a small amount of water movement in the bowl. Seeing my original Flapper was not bad I reverted back to it and all was good again. I kept the Korky Flapper and will try to use a blow dryer and put weight on it to try to get the slight curl out of it so it will sit flat. For now the original Flapper works fine. Hope this helps.

1st time in my life installing this kond of things and it was not hard. I would say, I ignored couple of steps and its still working fine.

This works and stops when it has to. No more runny toilet. But it does have a lot of leaks on the sides of the top. I don’t think it last too long. Nothing is done with quality anymore I think.

I have a hard fill valve (not a flex tube), and this was a little longer than my previous one, so it was a pain to get installed without leaking - but the valve itself is far superior to the basic ones you get from Lowes or Home Depot. It fills fast and is quiet. Overall, a great product.

Took a moment to set it up, it's doing a great job for the toilet.

LOOKS GOOD, SIMPLER TO OTHER FLUSH VALVES.

After having attempting to troubleshoot my running fill valve which didn’t resolve the issue I went shopping on Amazon for a replacement and , decided on purchasing this all in one kit so that I could diy it myself. There were very good step by step instructions , I was able to easily adjust the height and, the new fill valve was installed in less than a 1/2 hour … most importantly it works perfectly thus avoiding paying for a plumber. *Totally my mistake and, I don’t know how I missed it however, just a heads up before ordering this kit is to confirm your existing flapper size as unfortunately, the one included was too small for my toilet tank. I didn’t return the kit because, it was my own mistake and, because my primary concern was replacing the fill valve and putting an end to water costs/wasted water and, this did exactly that. .

Worked like a charm! Easy isntall and good instructions.

Valve pour niveau d'eau dans réservoir de toilette

Good quality …resolved toilet bowl performance issue..

fixed my problem , fast delivery thank you