Colour Name:red  |  Size Name:22mm Do it yourself tubeless conversion has never been easier! But we provide you all your needs in that kit, give great help. List: Presta valves-1 pair-Aluminum stem and plastic cap Tape-1 piece-length:30m-Width:22mm/24mm Tire clamp-1 piece-Nylon with glass fiber Valve core tool-1 piece-Aluminum Injector- 1 piece Tire lever-1 pair How to do : Tape: 1 Clean the rim by alcohol 2 Start applying the tape from 5-6 cm of the valve hole. 3 Tape around the rim at least 2 times. 4 Remove any visible air bubbles during taping process. 5 Check around the rim to see if there is any bubble left or wrinkles. If needed, re-tape the rim. 6 Find the valve hole with the help of a flash light. 7 Use a sharp knife cut off the tape that covers the valve hole. 8 File the tape around the valve hole, ensure a clean valve hole for the installation of the valve stem. Valves: 9 Check if the valve core is well tightened. 10 Remove the lock nut and O-ring. 11 Insert the valve stem through the valve hole on the rim. 12 Place the O-ring on the valve stem. 13 Thread the lock nut onto the valve stem. 14 Tighten the lock nut until the valve rubber end is pulled tightly in the rim valve hole. Tire clamp and tire levers 15 Assemble the tire use the tire clamp,it can replace your hand to grab the stubborn tire, leave you two hands to hold the wheel and use the tire lever. Valve core tool 16 Remove the valve core by the valve core tool. Tubless injection 17 Inject tubeless sealant with injector. 18 Rotate the wheel carefully, make sure the sealant covers every part inside the tire and rim. 19 Pump the tire until the tire bead set into the rim.
Trustpilot
3 weeks ago
2 weeks ago
