Handlebar Bike Mount with 360 Swivel for GoPro12/11/10/9/MAX, insta360 GO2/GO 3/3S,X4/X3/X2/RS/R – 100% CNC Aluminum, 22-34mm Adjustable Clamp Works with Most Mountain Bikes

Works as expected. It is a little more robust than I expected and I like that.

Sturdy metal fittings and it is easy to adjust but it requires an allen wrench (supplied) to tighten onto the handlebars. It's easy to tighten with the wrench but the wrench is easy to lose.

Although it didn't fit my handlebar moustache as snugly as I'd hoped I was able to make it work.

So the camera mount portion(looks like fins) needed to be drilled out (don't drill the threads!!!) with a 13/64 drill bit in order to get the tension bolt through which could be a huge issue to anyone that is not mechanically inclined to do so, however the construction is all aluminum and seems pretty sturdy.It has a locking rotation mechanism with 30 degree positions, so 12 determined positions in the "360 degree" rotation.Seems to fit 22mm to 31.8mm(just barely). The bar clamp hole is around 28mm diameter in order to accommodate many different sized bars, but imo, they should make a 22mm version and a 31.8mm version since these are standard sizes and would allow a much better clamping force and reliability.Tightening too much will definitely result in a cracked clamp.

I like that it makes it hands free but it just adds bulkieness to the scope

Sturdy ,steady and solid Product

The way the pins go into the two pieces of the bracket, the bolts can only go down through the side with the camera mount - therefore it is NOT possible to mount this below your bars. If the threading on both sides was equal, you could mount it either way - but it is NOT

Product will not clamp on properly, as much as i tried tightening it down it does not sit steady. It continuously rotates around and swivels camera up and down. I even tried tightening it down with some pliers and that didn't work.

This is a well designed and made accessory that is easy to fit and is exactly as described.The bracket just stays on the bike and I connect the GoPro before every ride.I will likely buy another one in the future.UPDATE March 2024I have used this for three months and have to say my initial review was wrong.The screw doesn't go tight enough to hold the GoPro in place. I have even used pliers to get it super tight. Every pot hole bump or jolt makes the camera fall forward which means much of your recording is of the front tyre and road and not of the person who just about took you out.UPDATE March 2024I contacted EVO for a replacement. They eventually responded saying" Hi there, we are unable to send this to your address. Is there an address within the US that we can send it to you?"They were able to post it when I purchased it but now they can't post a replacement.