Wudcare Floorboard Gap and Joint Filler 1 L Quick Drying

Product didn't dry to quickly so it was workable over a big floor.

I used this to fill the gaps in my parquet floor. Per the instructions, mixed with the fine dust from the sander bag.Firstly, it is still like putty nearly 24 hours later, not sandable after 20 mins.Secondly, like another reviewer I now note, it has developed black mould spots within hours, staining the wood below. Luckily, having failed to dry, it’s still soft enough to scrape out.Lastly, I’m fairly sure it’s expensive PVA/wood glue with added mould spores. For the remaining floor I bought some PVA, added sawdust and loosened with water, and it’s drying much faster with zero black spots.Very disappointing, frustrating and exhausting to redo my work with the sander hire on a clock and my weekend rapidly disappearing.I do not recommend.

I’ve used this when restoring a parquet floor we have. I initially used a chemical-based solvent which required great skill, beyond most people who do diy I assume, because it dries in less than a minute. This product being water- based is much easier to use having a much longer drying time.

I'd originally used PVA to mix with the saw dust but it completely disappeared after application. This stuff really stayed in the gaps. A couple of areas had a few deeper gaps so did have to fill again but it was dry and ready to sand in half an hour or so, so it didn't matter. Any overspill sanded off the wooden parquet tiles effortlessly. Picture attached is after filling and last sand, yet to varnish, will update when I do. I would recommend this.

Says "quick drying" on the packaging but after 24 hours was still like putty. Because it was like putty all it did was clog my sand paper meaning I could not finish the floor off. I had to wet the floors and scrape every last piece of this stuff off and it left a mouldy residue on the boards (see photos). It took a couple of 24 grit runs to remove this so essentially I had to start my sanding process all over again. This product is terrible. Please do not use this.

Used this on a comission for a table top made of herring bone. Was easy to apply and mixed well dried with a good colour match.Will be buying again

Poor solution best to avoid and use standard wood glue.Solution doesn’t harden when mixed with sawdust. I ended up using standard wood glue which worked

I Used this to get rid of gaps in my reclaimed beech floor. It worked well and I will continue to use it in other areas that need a bit of tlc. It dries very slightly darker than the wood dust it's mixed with. It takes longer than the instructions suggest to dry, in my case a couple of hours before i could sand it back. It came extremely well packed with extra tape over the top to prevent spillage. Delivery time was very fast! Excellent seller who I would happily use again and would also recommend to friends